Jump to content


Photo

$#!t Piss... Spiderchip Gurus?


  • Please log in to reply
3 replies to this topic

#1 beamernkh

beamernkh

    X-S Young Member

  • Members
  • Pip
  • 33 posts
  • Location:Portland, Oregon
  • Xbox Version:v1.6b

Posted 20 February 2006 - 04:31 AM

Hey, it's gotta be possible...

How can I re-flash a spiderchip (v1.0) if I don't have the external switch... long story...


Can I do it by crossing a trace somewhere? I can solder, but have no idea where to start as far as this goes... not really a Spidey-Kinda-Guy, just ran by this for free flashed it, then realized I had no lba48...damn... so I patched a M8, edited my evox, tried to flash and I get "unknown flash" I'm sure I just need to write enable it...

Anyone?
Thanks all!

Edited by beamernkh, 20 February 2006 - 04:34 AM.


#2 beamernkh

beamernkh

    X-S Young Member

  • Members
  • Pip
  • 33 posts
  • Location:Portland, Oregon
  • Xbox Version:v1.6b

Posted 20 February 2006 - 04:56 AM

My bad it's totally a spider 1.1...

#3 Chancer

Chancer

    Don't You Trust me?

  • Head Moderator
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 18,687 posts
  • Xbox Version:v1.6
  • 360 version:v3.0 (falcon)

Posted 20 February 2006 - 12:01 PM

You don't need the external swicth to flash the chip. without the switch the chip is always on.
you need to add the correct flash ID to evox ini to flash the chip

Edited by Chancer, 20 February 2006 - 12:02 PM.


#4 Alex548

Alex548

    X-S Knowledgebase

  • Head Moderator
  • PipPipPipPipPipPipPipPip
  • 4,411 posts
  • Location:Your mom's house
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 21 February 2006 - 02:50 AM

AID 3 has a BIOS add-on pack (just update the AID disc with the BIOS pack prior to burning to disc).

You'll find the BIOS flashing section under TOOLS on the disc.

Just boot AID 3 in your xbox, select the appropriate BIOS and reflash.


I also have an external switch in my garage I've never used (if you need one).

Edited by Alex548, 21 February 2006 - 02:55 AM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users