Jump to content


Photo

Help! Is My Xbox Dead?


  • Please log in to reply
2 replies to this topic

#1 matzaman

matzaman

    X-S Enthusiast

  • Members
  • 4 posts

Posted 06 March 2006 - 03:29 AM

Earlier this week, my Xbit chipped XBOX 1.5 (running Xecuter2_4976.02 bios) started loading the MS dash where it used to load the Evox dash. Ive had it working for about 18 months without issue. Its a soldered install. I thought I should reflash my bios, and after successfully reflashing all banks I settled on bank 4 (dips On, Off, On, Off) and verified the flash was successful. I was preparing to reinstall Evox from my boot Dvd, but all my XBOX seems to do is Frag (reboot 2 times, then flash red/green eject alternating).

Any ideas?
Thanks
--matzaman

matzaman@comcast.net

#2 Silentscream__

Silentscream__

    X-S Hacker

  • Moderator
  • PipPipPipPipPipPip
  • 2,202 posts
  • Location:North London, UK.
  • Xbox Version:v1.0
  • 360 version:unknown

Posted 07 March 2006 - 09:22 PM

Check your soldering, sometimes the d0 connection can get loose and give a porr connections which means you get a frag instead of a clean boot.

#3 matzaman

matzaman

    X-S Enthusiast

  • Members
  • 4 posts

Posted 08 March 2006 - 04:19 AM

thanks. Thats what it seems like. I removed the chip entirely and I can boot the MS Dash.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users