Jump to content


1.6 (samsung Ram) Wont Let Me Flash

  • Please log in to reply
2 replies to this topic

#1 Subpacket


    X-S Enthusiast

  • Members
  • 3 posts

Posted 07 March 2006 - 05:53 PM

I have installed a 1.1 spider chip into a crystal 1.6 xbox, (Samsung Ram). The system boots up with the Spider bios 1.02b and shows the menu of flash from disc, from hdd, unlock hdd lock hdd.

I just can't select any option. Its almost as if the xbox freezes at that point. I turn the chip off (via the switch) and I can use the controller in M$ dash. I just can't select any option when I boot from the chip.

Any thoughts are greatly appreciated.

#2 Subpacket


    X-S Enthusiast

  • Members
  • 3 posts

Posted 08 March 2006 - 03:55 PM

Ok, after digging in the forums - the Spider chip is very picky on *real* MS controllers.

I was able to plug in a *real* MS controller, and low and behold I can flash!

So I popped in my M8-16 bios DVD and burned it.

and now its fraggin all over the place. Lovely. Off to do a hot flash, this will be fun as I soldered in the chip.

#3 NeoDarkSaver


    X-S Enthusiast

  • Members
  • 25 posts
  • Xbox Version:v1.6b
  • 360 version:v1 (xenon)

Posted 15 April 2006 - 07:00 AM

You know in the bios screen, you move the highlighting by using the up and down on the pad, not the analog stick.

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users