Jump to content


Photo

Wrt54g Setup


  • Please log in to reply
1 reply to this topic

#1 bengu

bengu

    X-S Member

  • XS-BANNED
  • Pip
  • 98 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 25 March 2006 - 11:13 PM

hi i reciently updated my roughter with linksys new firmware that had support for wpa2 wireless encryption. Before I did this update I had the kia firmware installed which did not have the wpa2 encryption on it. I was wondering if there was an update for the linksys firmware with the wpa2 and kia station.

If there is can some one please let me know? If there is not is there an easy setting I can do to have my roughter allow kia station?




#2 mayto

mayto

    X-S Young Member

  • Members
  • Pip
  • 55 posts

Posted 05 June 2006 - 02:19 PM

update your firmware to thibor release http://www.thibor.co.uk/#downloads .make sure you choose the correct firmware and router version number whether you have wrt54g or wrt54gs.some of the newer router versions cannot be updated with thibor.recommended to flash through wired connection.check the version number on your router.after flash then go into management/statup script and add the following script

route add default gw 192.168.1.1
echo "nameserver 192.168.1.1" > /tmp/resolv.conf
cd /tmp
echo "#!/bin/sh" > startkaid
echo "cd /tmp" >> startkaid
echo "if [ ! -s gokaid ]; then" >> startkaid
echo "wget \"http://www.ju1c3.com/kaistation_kaid\" -O gokaid" >> startkaid
echo "wget \"http://www.ju1c3.com/kaid.conf\"" >> startkaid
echo "sleep 1;chmod +x gokaid;fi" >> startkaid
echo "./gokaid -d" >> startkaid
chmod +x startkaid
echo "*/2 * * * * root /tmp/startkaid" > cron.d/check_kaid
touch crontab


reboot the router and check if kai is running after a few minutes. using run command in router management page,type ps and return it.you should get following output if kai is runing

148 root 840 S ./gokaid -d
149 root 840 S ./gokaid -d
150 root 840 S ./gokaid -d
151 root 840 S ./gokaid -d
152 root 840 S ./gokaid -d
153 root 840 S ./gokaid -d
154 root 840 S ./gokaid -d
155 root 840 S ./gokaid -d
156 root 840 S ./gokaid -d
157 root 840 S ./gokaid -d
158 root 840 S ./gokaid -d
3370 root 420 S /bin/sh /tmp/.webcmd.sh
3371 root 332 R ps






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users