Jump to content


Photo

Flubber Screen (error 5)


  • Please log in to reply
4 replies to this topic

#1 dchoate99

dchoate99

    X-S Enthusiast

  • Members
  • 8 posts

Posted 01 April 2006 - 03:41 PM

I'm really desperate for some help here. My v1.0 with Matrix solderless and 120Gb hd has been functioning flawlessly for over 2 years. Just yesterday, out of the blue, I started getting the MS flubber screen and Error code 05. I removed and reseated the Matrix and it's showing a green light. Does a green lite indicate that all pins are aligned correctly and that my problem is not an alignment issue? If so, what else could be wrong. My XBox hasn't even been moved in months so I don't know what could have caused this. Might a reflash of the bios resolve this?

#2 dchoate99

dchoate99

    X-S Enthusiast

  • Members
  • 8 posts

Posted 02 April 2006 - 04:24 PM

OK, I reflashed the bios (with x2 4983). Still getting the same 05 error. Does anyone have any ideas as to something else I could try?

#3 ephesith

ephesith

    X-S Senior Member

  • XS-BANNED
  • PipPip
  • 153 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 10 April 2006 - 04:02 PM

sounds like the chip is dead. Error five means the HDD is unlocked. So the chip seems to be ignoring the modified bios and is loading the stock bios. Double check your dip switches to make sure they are correct. If they are correct and your have the solid green light and you're sure you flashed the chip correctly then I dont know what to say except get another chip.

I'm presently in the same boat. I have my matrix flashed right and aligned right and I have the switches set right but it STILL ignores the damn bios!!!!

#4 Silentscream__

Silentscream__

    X-S Hacker

  • Moderator
  • PipPipPipPipPipPip
  • 2,202 posts
  • Location:North London, UK.
  • Xbox Version:v1.0
  • 360 version:unknown

Posted 10 April 2006 - 04:26 PM

Clean and scrape the d0 point or ground it with a piece of wire and some solder if you dont mind the chip being always on.

#5 vickster

vickster

    X-S Enthusiast

  • Members
  • 4 posts

Posted 06 August 2006 - 05:34 PM

Same thing just started happening my my v.1.0 xbox with matrix chip. Started getting the error 5 code, so I figured it was trying to load the default bios and balking due to the unlocked after-market HDD. Now here's the weird thing: I pulled the mod chip and carefully read throught the developer's kit manual. Double-checked the dip switches and re-seated the matrix - all the appropriate LED's depending upon the dip switch settings. I've set the switches so the matrix loads by default; however, the default stock bios loads everytime. Of course, the good news is at least I'm not getting the error 5 code and we can still use the xbox, just not all the features allowed with the mod. If the mod chip is shot, how is it possible for the stock bios to load with the aftermarket HDD?






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users