Tutorial: New Wiring Method For Atx/pc Psu, 360 Power Mod
Posted 16 May 2006 - 05:41 AM
“Go to the extreme snap in to a Slim-Jim”
Posted 16 May 2006 - 06:44 AM
Should put up the schematic for the logic circuit. And i suppose if a 100k resistor doesnt work just put in a 10k instead.
EDIT: hey its my 60th post lol
Edited by bigjimmy, 16 May 2006 - 06:45 AM.
Posted 16 May 2006 - 06:49 AM
I tested 100k and 47k and both seam to work fine.
Edited by patrick2269, 16 May 2006 - 06:52 AM.
Posted 16 May 2006 - 07:15 AM
Posted 21 May 2006 - 02:46 AM
It does work cause i put 3.3V on the wire and the PSU will turn on fine. Also i used a 100k resisotr aswell.
Heres a crappy pic:
Now the only problem will be actually connecting it to the 360. I dont have an intercooler (theyre not real common in australia) and im not taking the 360 apart as it has the warrenty till next febuary. Would i be able to try solder the wires onto the metal contacts on the power plug?
I put a tread in the BST asking if anyone has an intercooler or a 360 power lead theyd want to sell me.
EDIT: Oh yeah i also used a BC 548 NPN transistor
Edited by bigjimmy, 21 May 2006 - 02:48 AM.
Posted 21 May 2006 - 03:00 AM
I got together a 1k and 10K resistor to test with my transistor and the PSU will not power on, so it seems with my transistor the higher you go with the resistor the more stable it becomes, so I’m going to stick with the 100K, or I might jump it up to 200k or 300K. LOL
Posted 21 May 2006 - 03:12 AM
Posted 21 May 2006 - 04:13 AM
Posted 23 August 2006 - 04:05 PM
Posted 23 August 2006 - 08:26 PM
Posted 28 August 2006 - 08:21 PM
Posted 28 August 2006 - 11:31 PM
Posted 29 August 2006 - 12:50 AM
Edited by GSX, 29 August 2006 - 12:51 AM.
Posted 29 August 2006 - 08:31 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users