Jump to content


Photo

Slayer Auto Installer Question


  • Please log in to reply
8 replies to this topic

#1 Mur21

Mur21

    X-S Young Member

  • Members
  • Pip
  • 30 posts
  • Xbox Version:v1.0
  • 360 version:unknown

Posted 30 May 2006 - 12:14 AM

When I put the Slayer auto installer in, should the switches on my xecutor 2.6 chip be set to?

chip on, flash protect on/off?, bank 1 or 2?

#2 BigDaddyShoo

BigDaddyShoo

    X-S Hacker

  • Members
  • PipPipPipPipPipPip
  • 2,230 posts
  • Location:Charlotte, NC
  • Xbox Version:v1.1
  • 360 version:v1 (xenon)

Posted 30 May 2006 - 12:57 AM

It should be set to whichever bank you've flashed with your hacked BIOS of choice. Otherwise, it won't boot the disc.

#3 clark_kent

clark_kent

    X-S Young Member

  • Members
  • Pip
  • 46 posts

Posted 30 May 2006 - 01:26 AM

The switches should be set the same as when you are using your xbox to play backed up games.
If you loaded the hacked bios onto bank one then have the switches set for bank one with the chip on. The flash protect should be set to on to prevent any mistakes. If the CD is burned correctly then the CD will boot up to Slayers and you'll be on your way. Take a look here Slayer's should be burned the same way.

#4 Chancer

Chancer

    Don't You Trust me?

  • Head Moderator
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 18,687 posts
  • Xbox Version:v1.6
  • 360 version:v3.0 (falcon)

Posted 30 May 2006 - 09:49 AM

QUOTE(clark_kent @ May 30 2006, 01:33 AM) View Post

If the CD is burned correctly then the CD will boot up to Slayers and you'll be on your way. Take a look here Slayer's should be burned the same way.

Don't follow the link given. Slayers is not burned the same way as a Bios Disc.
A Bios disc is a data disc. Slayers is an image. they are not burned the same way at all.


#5 Mur21

Mur21

    X-S Young Member

  • Members
  • Pip
  • 30 posts
  • Xbox Version:v1.0
  • 360 version:unknown

Posted 30 May 2006 - 08:03 PM

ok i burned the slayer iso file to a dvd-r disc. when i boot up with the dvd in the drive the xbox i get error code 06. When i set the switch over to bank 2 slayer disc still doesn't auto start instead I get the FlashBios 3.0.3 blue menu screen.

I followed the guide to unlock my 120gb and used the master password to do it, I thought it worked the only thing i didn't do was format to the pc...was I suppose too?

this 120gb hdd was successfully installed with chip on my old mobo and i'm trying to format for this replacement mobo and yes this replacement board came with matching hdd.

any suggestions?

#6 Chancer

Chancer

    Don't You Trust me?

  • Head Moderator
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 18,687 posts
  • Xbox Version:v1.6
  • 360 version:v3.0 (falcon)

Posted 30 May 2006 - 08:24 PM

The drive is still locked to the eeprom on your other motherboard if you are getting error 6.
also you can't run slayers until you flash the chip with a hacked bios

#7 Mur21

Mur21

    X-S Young Member

  • Members
  • Pip
  • 30 posts
  • Xbox Version:v1.0
  • 360 version:unknown

Posted 30 May 2006 - 08:28 PM

shouldn't the chip still be flashed from the first install or do i have to re-flash it?

#8 Chancer

Chancer

    Don't You Trust me?

  • Head Moderator
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 18,687 posts
  • Xbox Version:v1.6
  • 360 version:v3.0 (falcon)

Posted 30 May 2006 - 08:34 PM

If its bringing up flashbios its not flashed with a hacked bios. Unless you have a hacked bios on the other bank?
If so boot from the bank with the hacked bios to boot slayers.
You need to unlock that drive first

#9 Mur21

Mur21

    X-S Young Member

  • Members
  • Pip
  • 30 posts
  • Xbox Version:v1.0
  • 360 version:unknown

Posted 30 May 2006 - 08:38 PM

got it.....thanks for clearing that up




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users