hey guys - soldering a pin header onto a 1.3 xbox to stick a spider chip on since it kept coming loose... have tested all other pins and they are all returning proper voltages except LAD3 which I have yet to see return anything other than 0.0
the xbox frags when booting up w/ the chip installed.. boots fine w/o it..
the chip is already flashed and worked before i started this 'project'
im assuming this one pin is causing it not to work properly.. ive tried desoldering and resoldering about 10 times to no avail.. im thinking the lpc hole is screwed up now... is there an alternate spot on the motherboard i can wire to the pin header to get this thing to work?
Alternate Lad3 On Xbox 1.3
No replies to this topic
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users