Jump to content


Photo

Duox-2 Boots To Stock Dash W/no Led


  • Please log in to reply
2 replies to this topic

#1 2green

2green

    X-S Member

  • Members
  • Pip
  • 110 posts

Posted 03 July 2006 - 07:04 PM

Installed new duox-2 on 1.6 mb. Did NOT use the LPC rebuild.
Checked all joints they look good.

It boots to the stock dash but the led does not light up. Any ideas on
which solder joint may be the culprit?

2green

#2 _GhOsT_

_GhOsT_

    X-S Genius

  • Members
  • PipPipPipPip
  • 970 posts
  • Location:
  • Xbox Version:v1.6
  • 360 version:v4.0 (jasper)

Posted 04 July 2006 - 04:53 AM

QUOTE(2green @ Jul 3 2006, 12:11 PM) View Post

Installed new duox-2 on 1.6 mb. Did NOT use the LPC rebuild.
Checked all joints they look good.

It boots to the stock dash but the led does not light up. Any ideas on
which solder joint may be the culprit?

2green

does that mean that you didnt do a rebuild or just did the wires instead


#3 2green

2green

    X-S Member

  • Members
  • Pip
  • 110 posts

Posted 04 July 2006 - 01:31 PM

No rebuild. I did the wires! All ohm out ok.

2green




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users