Hardwiring Dongle Help?
Posted 21 July 2006 - 11:54 AM
I started wiring up my dongle inside my box recently but am getting stuck with the contoller port bit
Iam trying to follow: http://www.xbox-scen...-dvd-dongle.php by twistedsymphony.
I dont know where: "Notice that for each port there are three little metal tabs that brush against the square metal flashing of the respective port." (Step 2)
Ive done alot of it but am getting stumped here.
Please can someone help or explain what is supposed to be going on when its all connected, or twistedsymphony if you their please reply.
Anyone else done this mod? Thanks.
Posted 21 July 2006 - 03:57 PM
on the second picture the tape is right under the the BOX-S on the xbox-scene watermark
Posted 21 July 2006 - 09:22 PM
the little tab in this picture needs to be removed and then taped up so you have no contact with the controller when you put it back in.
Posted 22 July 2006 - 06:12 PM
basically u do not want the metal shielding to touch the controller port that you are modding.
Posted 22 July 2006 - 07:36 PM
But couldnt you just take off the metal shielding from the controller port??
Cheers for your help people!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users