Jump to content


Photo

Xbox 360 Motherboard Component List


  • Please log in to reply
152 replies to this topic

#1 G0t M4xx 21

G0t M4xx 21

    X-S Freak

  • XS-BANNED
  • PipPipPipPipPip
  • 1,990 posts
  • Location:ATX! Hook 'em Horns!
  • Xbox Version:v1.4
  • 360 version:v1 (xenon)

Posted 27 July 2006 - 06:17 AM

I've seen this happen a lot, hell, I've done it myself, you break off a component on the motherboard, then have no idea what it is, to find a replacement.

I just bought a dead X360 motherboard, I've pretty much given up on fixing it, it's pretty far gone (fell off a balcony), so here's what I'm gonna do:

For anybody that has broken off a component on a 360 mobo, give the part number on the board and I will remove the part from this parts board, measure the part, and reply back with the value so you can find a proper replacement. I may offer some of the larger components for sale (connectors, switches, coils, capacitors, larger IC's, etc).

I'll keep you updated, this is definitely going to be my parts board unless by some miracle I can fix it (Best I got out of it was to boot then freeze immediately in the little startup animation).

Later

-Tim

#2 G0t M4xx 21

G0t M4xx 21

    X-S Freak

  • XS-BANNED
  • PipPipPipPipPip
  • 1,990 posts
  • Location:ATX! Hook 'em Horns!
  • Xbox Version:v1.4
  • 360 version:v1 (xenon)

Posted 27 July 2006 - 06:35 AM

C6D4, C7D2: Capacitor, 0603, 2.4uF

reserved for additional listing

Edited by G0t M4xx 21, 27 July 2006 - 07:33 AM.


#3 G0t M4xx 21

G0t M4xx 21

    X-S Freak

  • XS-BANNED
  • PipPipPipPipPip
  • 1,990 posts
  • Location:ATX! Hook 'em Horns!
  • Xbox Version:v1.4
  • 360 version:v1 (xenon)

Posted 27 July 2006 - 07:30 AM

reserved for additional listing

#4 pricemeista33

pricemeista33

    X-S Expert

  • Members
  • PipPipPip
  • 555 posts
  • Xbox Version:v1.6
  • 360 version:v1 (xenon)

Posted 17 May 2007 - 06:05 PM

Hey Maxx, if you could take a look at my MOBO I would greatly appreciate it. I've performed a couple of your mods and they've all worked. I think I may have grounded out either those MOSFET chips you mentioned or something else. I viewed a diagram compiled by you and one of the other guys that shows of all the ground points. Well unfortunately I didn't see the point which I chose to ground to in that diagram. I've added a 12V CPU fan to the system and grounded it to the HDD metal casing instead of one of the ones highligted in that diagram mentioned above. Is it possible that this may have caused the chips or anything else to malfunction?

#5 ttkkee2

ttkkee2

    X-S Enthusiast

  • Members
  • 6 posts

Posted 30 March 2008 - 06:11 PM

Hi.

Anybody could say me the values of this components :S, please? I neet repair R8A2 from PC

R8A1
R8A2
C8A1
C8A2
IPB Image

Thasnks

Edited by ttkkee2, 30 March 2008 - 06:13 PM.


#6 RDC

RDC

    X-S Seraphic

  • Head Moderators
  • PipPipPipPipPipPipPipPipPipPipPipPip
  • 8,790 posts
  • Gender:Male
  • Location:VA
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 30 March 2008 - 08:59 PM

R8A1 - 10k

R8A2 - 100ohm

C8A1 - Not sure of the exact value, most likely a .01uf or .001uf (exact value wouldn't really matter since it's a filter cap) and it'll be fine with it missing if ya just want to leave it out.

C8A2 - Not Installed

#7 ttkkee2

ttkkee2

    X-S Enthusiast

  • Members
  • 6 posts

Posted 08 April 2008 - 09:06 AM

QUOTE(RDC @ Mar 30 2008, 10:35 PM) View Post

R8A1 - 10k

R8A2 - 100ohm

C8A1 - Not sure of the exact value, most likely a .01uf or .001uf (exact value wouldn't really matter since it's a filter cap) and it'll be fine with it missing if ya just want to leave it out.

C8A2 - Not Installed


Thanks a lot!!! last question, you know if can I use a resistor with tolerance +-1%?

#8 guyrich

guyrich

    X-S Enthusiast

  • Members
  • 3 posts

Posted 10 April 2008 - 08:44 AM

Can i ask how did or plan get the connectors soldered off from the motherboard and can the connectors be replaced.Specifically the power and rf connectors

#9 RDC

RDC

    X-S Seraphic

  • Head Moderators
  • PipPipPipPipPipPipPipPipPipPipPipPip
  • 8,790 posts
  • Gender:Male
  • Location:VA
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 10 April 2008 - 04:07 PM

QUOTE(ttkkee2 @ Apr 8 2008, 04:42 AM) View Post

Thanks a lot!!! last question, you know if can I use a resistor with tolerance +-1%?

Yes, for those anything that's +/- 5% will be fine though, either way.

QUOTE(guyrich @ Apr 10 2008, 04:20 AM) View Post

Can i ask how did or plan get the connectors soldered off from the motherboard and can the connectors be replaced.Specifically the power and rf connectors

Yes they can be replaced. Ya just have to use a good amount of heat, especially on the ground lugs and connections since you're heating up all of that extra copper.

#10 guyrich

guyrich

    X-S Enthusiast

  • Members
  • 3 posts

Posted 10 April 2008 - 04:59 PM

Thanks alot rdc mate and want to ask is it worth replacing power and rf connectors or just buy a new xbox.Coz the pins are broken and need to replace

#11 RDC

RDC

    X-S Seraphic

  • Head Moderators
  • PipPipPipPipPipPipPipPipPipPipPipPip
  • 8,790 posts
  • Gender:Male
  • Location:VA
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 10 April 2008 - 09:39 PM

It would be worth replacing them if the 360 is still in good working order and that's all that's wrong with it, I don't see any need to replace the whole thing for a couple of shot connectors and there are plenty of bad 360 motherboards around ya can get the connectors from.

#12 hux19

hux19

    X-S Enthusiast

  • Members
  • 4 posts

Posted 21 April 2008 - 12:29 PM

Hi Tim

Can you tell what component C5R18 under the GPU is as i've knocked it off?

Many thanks
steve

#13 GGR

GGR

    X-S Enthusiast

  • Members
  • 1 posts

Posted 09 May 2008 - 03:54 AM

Can you tell me the value of C4R53? It's located under the GPU opposite side of the board.

Thank you

#14 G0t M4xx 21

G0t M4xx 21

    X-S Freak

  • XS-BANNED
  • PipPipPipPipPip
  • 1,990 posts
  • Location:ATX! Hook 'em Horns!
  • Xbox Version:v1.4
  • 360 version:v1 (xenon)

Posted 09 May 2008 - 10:03 AM

C4R53: I wouldn't worry about it, the 360 will run fine without it. Only if a significant number of those caps are missing will it cause issues (fluctuations in the power supply), you will probably do more damage trying to replace it.

#15 ttkkee2

ttkkee2

    X-S Enthusiast

  • Members
  • 6 posts

Posted 10 May 2008 - 10:05 PM

You know the values of this element? C9D4

It is the 5V+ in the picture: IPB Image


Thanks a lot again happy.gif''




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users