Jump to content


Photo

Chameleon Install Pics, Please


  • Please log in to reply
2 replies to this topic

#1 mikearama

mikearama

    X-S Senior Member

  • Members
  • PipPip
  • 171 posts

Posted 02 September 2006 - 02:40 PM

Just got handed a Chameleon chip to install, and I cannot find a working guide or diagram... not here or at xodus. Just a close up of the P/E diodes.

Any help out? Preciate it.

#2 mikearama

mikearama

    X-S Senior Member

  • Members
  • PipPip
  • 171 posts

Posted 06 September 2006 - 12:28 PM

No one has any chameleon install pics stored anywhere? Sure could use the P/E points...
Thanks.

#3 NYCXBOX

NYCXBOX

    X-S Senior Member

  • Members
  • PipPip
  • 267 posts
  • Location:UPPER NYC (Now in the Midwest)
  • Xbox Version:v1.1
  • 360 version:v4.0 (jasper)

Posted 17 December 2006 - 07:26 AM

I don;t have a pic - but this helped me out - real easy to understand.

Alternate Method 1 to attach the Power and Eject lines to the Xbox under the MOBO

Use the pic below as a guide. (NO PIC SORRY) Locate the front panel wiring harness (a connector holding 9 yellow wires). You can see that Pin 1 is indicated by a small triangle on the motherboard.(top of the MOBO) Using Pin 1 as a reference point, Pin 2 (Power button line) is opposite Pin 1. Pin 4 (Eject button line) is next to Pin 2 (diagonal from Pin 1). NO FLIP IT OVER and SOlder to those pins.

Easy enough.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users