Jump to content


Photo

New Harddrive Installed, Flash Fxp Not Connecting


  • Please log in to reply
4 replies to this topic

#1 shaman

shaman

    X-S Senior Member

  • Members
  • PipPip
  • 152 posts

Posted 12 May 2003 - 05:41 PM

I just installed, locked and re-formatted a maxtor 120 gig hdd. So I went to boot up FlashFXP to transfer my C: and E: back and FlashFxp cannot connect....egads, what do I do?

#2 MissSplitch

MissSplitch

    X-S Expert

  • Members
  • PipPipPip
  • 526 posts
  • Location:Parts Unknown
  • Xbox Version:v1.1
  • 360 version:v1 (xenon)

Posted 12 May 2003 - 05:45 PM

My friend's 1.0 did this the other day, but then the head and platter started clacking when teh drive was powered up after a reboot. I had to replace the drive, so I can't be of much help.

Try unlocking it and writing to it, see if that is a temp. solution.

-Splitch

#3 shaman

shaman

    X-S Senior Member

  • Members
  • PipPip
  • 152 posts

Posted 12 May 2003 - 05:48 PM

QUOTE (MissSplitch @ May 12 2003, 02:45 PM)
My friend's 1.0 did this the other day, but then the head and platter started clacking when teh drive was powered up after a reboot. I had to replace the drive, so I can't be of much help.

Try unlocking it and writing to it, see if that is a temp. solution.

-Splitch

I think it is more a question of some settings in EvoX and maybe FlashFXP....hmm

edit : 2 seconds later...... Heh, just had to change ONE number in FlashFXP site manager....whew.

Edited by shaman, 12 May 2003 - 05:51 PM.


#4 MissSplitch

MissSplitch

    X-S Expert

  • Members
  • PipPipPip
  • 526 posts
  • Location:Parts Unknown
  • Xbox Version:v1.1
  • 360 version:v1 (xenon)

Posted 12 May 2003 - 05:53 PM

Ah, I didn't consider the "trying to connect to a non-existent server" problem. smile.gif

-Splitch



#5 xcalibur

xcalibur

    X-S Enthusiast

  • Members
  • 19 posts

Posted 13 May 2003 - 09:20 AM


Have you gone into system set up yet? have you ever FTP'ed into your Xbox?

You need to set the IP address as static in the system set up. then when you done that scroll down the bottom of the set-up screen and make sure that you save the settings. then turn you box off. Check that whole cable thing is cool. I use a cross-over. I got rid of my hand made one and the trnsfer speed went from 300Kbps to 8,000Kbps.

There are heaps of little tricks and tips i learned when i set mine up. ask if more help is needed




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users