Jump to content


Photo

Known Problems With Ms28


  • Please log in to reply
5 replies to this topic

#1 myztx

myztx

    X-S Enthusiast

  • Members
  • 13 posts

Posted 23 September 2006 - 09:47 AM

I think i have done it.. bricked the drive..

I got a ms28 drive that i first installed a dual boot chip to. Got e64 and e65 depending of witch chip i switched to. Ok i removed the chip. Tested, the x360 read the dvds. Ok, so no problem with the drive itself.
I did the vcc trick one more time extracted patched and wrote the image agian.
Now i got e65.

i tried to manually cut'n paste the key with the same result. Same error with orig.bin to..

What do i do wrong? Any ideas?

Edited by myztx, 23 September 2006 - 09:52 AM.


#2 myztx

myztx

    X-S Enthusiast

  • Members
  • 13 posts

Posted 23 September 2006 - 10:34 AM

No, i got e64 now..

#3 Gatecra5her

Gatecra5her

    X-S Enthusiast

  • XS-BANNED
  • 19 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 23 September 2006 - 11:06 AM

I was getting the exact same error with the vcc trick but there was a simple explanation. The space where the resister used to be needs to be bridged with solder, or the 2 wires you used (the ones you put together just before executing the mtkflash command) need to be wound together securely. You will get e64 or e65 unless these wires are touching. Reply and let me know if this was the problem, i thought i'd bricked mine for a while.

-Mark

#4 myztx

myztx

    X-S Enthusiast

  • Members
  • 13 posts

Posted 23 September 2006 - 11:09 AM

5 min befor i read this post i realized that, man im happy! biggrin.gif

What resistace do that resistor got?

Edited by myztx, 23 September 2006 - 11:10 AM.


#5 Gatecra5her

Gatecra5her

    X-S Enthusiast

  • XS-BANNED
  • 19 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 23 September 2006 - 11:24 AM

Haha you were in the exact same position as me dude, such a relief isn't it biggrin.gif biggrin.gif o idea about the resistance sorry, but just connect the wires together, i haven't got any resistor connected.

-Mark

#6 ash1471

ash1471

    X-S Expert

  • Members
  • PipPipPip
  • 651 posts
  • Location:Stockport Manchester North West UK
  • Xbox Version:v1.6
  • 360 version:v1 (xenon)

Posted 23 September 2006 - 11:49 AM

No resistor is needed you are safe to use it as is. So long as The wires are taped up and secure smile.gif




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users