Jump to content


Photo

Installed Duox2 Gs - Now How Do I Solve Error 05?


  • Please log in to reply
23 replies to this topic

#1 agentdz015

agentdz015

    X-S Young Member

  • Members
  • Pip
  • 52 posts
  • Interests:mod chip - DuoX2 GS
  • Xbox Version:v1.1
  • 360 version:none

Posted 16 October 2006 - 08:54 PM

Title pretty much says it all.

I was having a hell of a time solving my error 05 woes with the softmod, so i got and installed a duox2 gs - but my xbox doesn't care - it's like it isn't eventhere.

How do i get around my error 05?

thanks!



#2 agentdz015

agentdz015

    X-S Young Member

  • Members
  • Pip
  • 52 posts
  • Interests:mod chip - DuoX2 GS
  • Xbox Version:v1.1
  • 360 version:none

Posted 16 October 2006 - 09:05 PM

incidentally- isn't the startup screen (the big green x) supposed to look different or something...??

it doesn't.

Does this mean i didn't install the chip right? If so - what do I need to fix...?

Also - there is a little light that is evenly blinking on the chip when the xbox is running...

Let me know if you have any tips.

Thanks!



#3 _GhOsT_

_GhOsT_

    X-S Genius

  • Members
  • PipPipPipPip
  • 970 posts
  • Location:
  • Xbox Version:v1.6
  • 360 version:v4.0 (jasper)

Posted 16 October 2006 - 09:13 PM

your d0 is not soldered correctly

if you installed it correctly
you would see either flash bios (cromwell chip) or a a different color X at start up (blue chip)

#4 agentdz015

agentdz015

    X-S Young Member

  • Members
  • Pip
  • 52 posts
  • Interests:mod chip - DuoX2 GS
  • Xbox Version:v1.1
  • 360 version:none

Posted 16 October 2006 - 09:52 PM

ok - one more question then... a clarification.

I'm soldering the d0 on the bottom of the motherboard... I can't tell from the instructions i'm using exactly where to attach the wire - look at this picture and tell me where to attach the D0 -> A or B.

IPB Image

thanks!

#5 TonyF11

TonyF11

    X-S X-perience

  • Members
  • PipPip
  • 371 posts
  • Location:Wigan N/W England
  • Xbox Version:v1.6
  • 360 version:v1 (xenon)

Posted 16 October 2006 - 10:11 PM

Solder it to point A

#6 agentdz015

agentdz015

    X-S Young Member

  • Members
  • Pip
  • 52 posts
  • Interests:mod chip - DuoX2 GS
  • Xbox Version:v1.1
  • 360 version:none

Posted 16 October 2006 - 10:30 PM

shoot - i'm already on A and i was hoping someone would tell me to go somewhere else... oh well - i'll try to redo the solder joint just in case.

any other tips if this doesn't solve it?



#7 agentdz015

agentdz015

    X-S Young Member

  • Members
  • Pip
  • 52 posts
  • Interests:mod chip - DuoX2 GS
  • Xbox Version:v1.1
  • 360 version:none

Posted 16 October 2006 - 10:59 PM

I just tested it with my multi-meter, and my connection from the chip to the board is solid. D0 is connected. any other tips...?



#8 agentdz015

agentdz015

    X-S Young Member

  • Members
  • Pip
  • 52 posts
  • Interests:mod chip - DuoX2 GS
  • Xbox Version:v1.1
  • 360 version:none

Posted 17 October 2006 - 01:47 AM

I've tested with a multimeter, and my D0 line is sound. Is there anything else that might be amiss? The chip flashes when the xbox is powered on with the power button (not when powered on with the eject button) - but the microsoft screen is just the normal one - not some special cromwell or blue screen or whatever.

I really want to get this all sorted out - any tips?

thanks!



#9 appleguru

appleguru

    an Apple a Day...

  • Members
  • PipPipPipPipPipPip
  • 2,694 posts
  • Location:Colorado Springs, CO Boston, MA
  • Xbox Version:v1.6
  • 360 version:v1 (xenon)

Posted 17 October 2006 - 02:14 AM

Check d0. Again. if the chip is getting power and d0 is connected.. it should at least FRAG.

Actually, is this a blue duox2? Or a cromwell? If it's a blue, you could be getting the normal m$ dash just b/c you haven't flashed a new bios yet.. though you should at least see "Xecuter 2" under the x logo at boot.. or a purple evox shield in the top left corner.

#10 agentdz015

agentdz015

    X-S Young Member

  • Members
  • Pip
  • 52 posts
  • Interests:mod chip - DuoX2 GS
  • Xbox Version:v1.1
  • 360 version:none

Posted 17 October 2006 - 04:23 AM

it's not the blue one - it's white.

I'm checking the D0 again, but i was pretty thorough with my multi meter in checking it.

As far as the MS dash is concerned, i was getting error 05 before installing the chip. And now i'm still in the same place - no funky boot screen, and just error 05 waiting for me at the end of every boot.



#11 Chancer

Chancer

    Don't You Trust me?

  • Head Moderators
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 18,687 posts
  • Gender:Male
  • Xbox Version:v1.6
  • 360 version:v3.0 (falcon)

Posted 17 October 2006 - 01:35 PM

Ground the Xbox D0 wire. That is unsolder it from the chip end and solder it to a metal ring on the mobo round one of the screw holes.
Boot the box with the power button and report the symptoms back in this thread.
Don't make another thread for this

#12 agentdz015

agentdz015

    X-S Young Member

  • Members
  • Pip
  • 52 posts
  • Interests:mod chip - DuoX2 GS
  • Xbox Version:v1.1
  • 360 version:none

Posted 18 October 2006 - 02:12 AM

Hey - i grounded the d0 wire - no difference. I turn on the xbox, and it boots just like normal. Regular boot to an error 05 screen. The chip sits there flashing away like it should be doing something... arg!

what does this all mean...?

what options do i have?



#13 FallsInc

FallsInc

    X-S Hacker

  • Moderator
  • PipPipPipPipPipPip
  • 2,280 posts
  • Gender:Male
  • Location:Ohio
  • Xbox Version:none
  • 360 version:none

Posted 18 October 2006 - 01:02 PM

then you have not connected it to the d0. are you sure you didn't solder it to the 3rd point from the other direction?

#14 Chancer

Chancer

    Don't You Trust me?

  • Head Moderators
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 18,687 posts
  • Gender:Male
  • Xbox Version:v1.6
  • 360 version:v3.0 (falcon)

Posted 18 October 2006 - 03:06 PM

Grounding D0 forces boot from the LPC. Your D0 is not connected correctly.
Post a picture of your work, see if anyone can spot something

#15 agentdz015

agentdz015

    X-S Young Member

  • Members
  • Pip
  • 52 posts
  • Interests:mod chip - DuoX2 GS
  • Xbox Version:v1.1
  • 360 version:none

Posted 18 October 2006 - 07:20 PM

Wait wait.... i think i did the grounding backwards... Were you saying to connect the d0 point on the chip to ground or to connect the d0 point on the motherboard to ground?

I connected the d0 point on the chip to ground.

I'll wait for someone to confirm this before I jump in with a hot iron. Thanks!







0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users