Jump to content


Photo

Update Frimware Problem


  • Please log in to reply
1 reply to this topic

#1 sarzaminman

sarzaminman

    X-S Enthusiast

  • Members
  • 8 posts

Posted 11 November 2006 - 08:31 PM

first i make a backup firmware with mtkflash 1.83c [original]
then i don a mistake i copy xtrem42a.bin(orginal in xtrem pack) directly on a floppy and whit mtkflash w /m xtrem42a.bin in my xbox drive
then i know my mistake and try to send x42b.bin(modifid firmware) in my xbox whit mtkflash but it says
DRIVE SCAND:
1 : ICH5 PRI MASTER
2 : ICH5 PRI SLAVE
CHOOSE ONE DRIVE 1OR2
PORT : 1F0 ,MASTER SLAVE: A0 STATOSE 51 SHOULD BE 70
and no work .
I have the orig.bin and my x42b.bin
can some one help me please?


#2 vinomarky

vinomarky

    X-S X-perience

  • Members
  • PipPip
  • 349 posts
  • Location:Australia
  • Xbox Version:unk
  • 360 version:unknown

Posted 12 November 2006 - 12:37 AM

Just a guess, but since you do not state which original firmware you had, I assume it was MS25.

If this was the case, then by flashing the Xtreme4.2 onto it (does not matter if your key is in it or not), it converts your drive to behave like a MS28 firmware.

Now that it has Xtreme 4.2, you need to;
(1) Use the Enable800 DL DVD to put it in mode for flashing or
(2) Use 'bad flash' method

Either way, you probably need a serial VIA chipset.

Do some reading - it does not sound like you have done irreperable damage.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users