Jump to content


Photo

Ms28 Stuck At Reading 00%


  • Please log in to reply
4 replies to this topic

#1 chophouze

chophouze

    X-S Enthusiast

  • Members
  • 1 posts

Posted 23 January 2007 - 01:38 AM

First off i use xbootmaker 0.6 and the latest 360sam also i have the rosewill212 sata+ultra ata raidcontroller....i created custom mtkflast for it with boot maker.

1.Powered on pc with 360(sata unplugged)
2.reached dos prompt plugged in sata cable and typed samread xxxxxxx yyyyy
3.turned off 360 pressed 3.which is the 360 drive(im sure)
4.waited 10sec detected drive
4. stalled at reading....00%


help would be greatly appreciated maybe $10 paypal reward for problem solver

#2 RiPpN-N-TrIppN

RiPpN-N-TrIppN

    X-S X-perience

  • Members
  • PipPip
  • 448 posts
  • Xbox Version:v1.1
  • 360 version:v1 (xenon)

Posted 23 January 2007 - 02:12 AM

umm
if u turned off the 360 when u selected the drive how do u expect it to be able to read/flash the drive if the power to the drive is turned off ???
ive never done a 28 before but im pretty sure it still needs power to be flashed ??
Rip


#3 caster420

caster420

    X-S Hacker

  • Members
  • PipPipPipPipPipPip
  • 2,527 posts
  • Location:Nugget Land
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 23 January 2007 - 02:15 AM

No, he is using the bad flash method.

Caster.

Edited by caster420, 23 January 2007 - 02:17 AM.


#4 Methadon

Methadon

    X-S Senior Member

  • XS-BANNED
  • PipPip
  • 292 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 23 January 2007 - 02:20 AM

Well, for one I think power whould be supplied to your drive during the read. For two, is this a stock drive, or has it been previously flashed?

#5 caster420

caster420

    X-S Hacker

  • Members
  • PipPipPipPipPipPip
  • 2,527 posts
  • Location:Nugget Land
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 23 January 2007 - 02:32 AM

I think he meant to say he selected the port, waited 10 or so seconds, then powered the drive back on. It should then start reading the tsop. This is the bad flash method. Whether it has been flashed or not doesnt matter with this method, it should dump whatever firmware is on there.

Did is say XTREME as the name of the device? It should, since you used Xtreme boot maker and it renames the device.

Caster.

Edited by caster420, 23 January 2007 - 02:40 AM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users