Jump to content


Photo

New Xtreme Boot Maker.


  • Please log in to reply
3 replies to this topic

#1 leetage

leetage

    X-S Enthusiast

  • Members
  • 2 posts

Posted 25 February 2007 - 10:12 AM

According to the NFO of the newest version of xtreme boot maker all you have to do is:


How to Use:
-----------

1. Load your floppy disk or connect your USB Flash Drive. (optional)
2. Run Xtreme Boot Maker.
3. Detect your sata chipset, if required.
4. Open your Xtreme Firmware's .rar file.
5. Select all the options you like.
6. Click "Create Disk".
7. Boot from your prepared drive or your NTFS cd.
8. Type "xRead xxxxxxx xxxxx" to backup your 360's original firmware.
9. Type "xFlash xxxxxxx xxxxx" to flash the Xtreme firmware.
(Don't include the quotes, and replace x with your 360's Serial Number.)

Is this confirmed to be working with the MS28?
Will this enter the key into the xtreme firmware while you are in DOS? and
What do you put for the x before read and flash?

I have not seen any guides using this method, so i am unsure about using it. Though it looks very easy only typing in two commands.

Thanks

#2 kidman64

kidman64

    X-S Member

  • Members
  • Pip
  • 94 posts
  • Location:poland
  • Xbox Version:none
  • 360 version:v3.0 (falcon)

Posted 25 February 2007 - 11:58 AM

i used xtreme boot maker to flash my ms28. I followed TextBooks tutorial, which you can find at www.360mods.net and on this forum as well

#3 sosotiit

sosotiit

    X-S Transcendental

  • Head Moderators
  • PipPipPipPipPipPipPipPipPipPip
  • 6,034 posts
  • Gender:Male
  • Location:Canada
  • Interests:Techno gadgets and espresso coffee
  • Xbox Version:v1.6
  • 360 version:v3.0 (falcon)

Posted 25 February 2007 - 03:02 PM

You will find a very good overview document here

look at the pinned,
rgds,soso

#4 rouneh

rouneh

    X-S Young Member

  • Members
  • Pip
  • 35 posts
  • Location:uk
  • Xbox Version:v1.4
  • 360 version:v1 (xenon)

Posted 01 March 2007 - 08:09 AM

QUOTE(leetage @ Feb 25 2007, 09:19 AM) View Post

Is this confirmed to be working with the MS28?
Will this enter the key into the xtreme firmware while you are in DOS? and
What do you put for the x before read and flash?



yes it works with the ms28, you can enter key either manually when in dos or enter into bootmaker and it will embed it into the bootdisc.

the x in xRead xFlash commands isnt a variable, they are the names of the exe's used in dos.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users