Kai And Xbox Connected Via Wifi
Posted 21 April 2007 - 02:20 PM
I'm new, I can't use kai on my xbox... have few problems..
My configuration is this:
XBOX connectet with cable on an access point wifi;
PC connected with cable to a router wifi witch is connected to internet...
The Xbox connect to internet from the access point to the router via wifi..
everything works fine, browsing pc from xbox, ftp from pc to xbox, internet connection.. but I'm not able to use kai xlink!!
I setted the wireless section, "Real" mac adderess my xbox mac address, Virtual mac address my wifi access point mac add.
If I go to diagnostic I have "No console have been detected yet!"
On network reachable I have YES!!!
Posted 22 April 2007 - 06:45 AM
Yeah that won't work.. You can see a list of supported network configurations here: http://www.teamxlink.../?go=quickstart
* Wireless connections from the PC running XLink Kai are not supported unless the wireless card can support promiscuous mode. However, we recommend that the PC running XLink Kai remains wired (to the router or access point) with a CAT-5 Ethernet cable.Your console can be wirelessly connected, through the use of a Wireless Gaming Adapter or Wireless Ethernet Bridge. Consult your documentation or manufacturer's website for assistance in wireless networking*.
Thats from faqs...
Posted 24 April 2007 - 06:25 PM
Posted 28 May 2007 - 10:02 AM
You can run that setup if you if what you have listed as an ap is an ethernet bridge, and you can run KaiD on your router (Open WRT). You can then run the GUI on your pc. The setup works fine, and I've used it myself.
How can I do that on my fonera???
Posted 08 January 2008 - 08:31 AM
but all i want to be able to do is to ftp from my pc to my xbox to put movies on there. you said that you were able to do this fine, what is your setup?
basically my problem is that i connect to my xbox from my pc through the router/ap and it immediately kicks me off, like there is some sort of conflict...
Posted 09 January 2008 - 02:37 AM
Posted 09 January 2008 - 10:53 PM
Posted 09 March 2008 - 11:08 PM
Posted 18 March 2008 - 04:05 AM
I have a la fonera my myself just a note the fonera don't have xlink support built into the firmware yet
From what I understand its there but many people are finding it difficult to get to work. Maybe its just too buggy at the moment?
Posted 15 July 2008 - 04:41 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users