Jump to content


Photo

Vga To Dvi-i On Mitu Wd-65732


  • Please log in to reply
2 replies to this topic

#1 Synconious

Synconious

    X-S Enthusiast

  • Members
  • 3 posts

Posted 28 April 2007 - 11:59 PM

Trying to get DVI-I working on my Mitu WD-65732. From what i can tell others have gotten this working on this tv, however i am unable to get any output at all. The TV shows the PC connection when i plug it in and turn the 360 on however all i get is a black screen. I have tried putting the VGA to a PC LCD and it works fine, and i tried adjusting the resolution to get the TV to take the input. I have read about a VGA PC levels setting in the new dash but i cant find the setting on my 360. Anyone else having similar issues with this.

Btw, its a Dynex VGA to DVI connection i got at BestBuy.

#2 _iffy

_iffy

    X-S X-perience

  • Members
  • PipPip
  • 412 posts
  • Location:burlington ontario Best Country: Canada
  • Xbox Version:v1.0
  • 360 version:none

Posted 01 May 2007 - 06:49 PM

From the specs PDF <right click "save as">
IPB Image

Those are the only resolutions that tv will support using the PC DVI-I input.

The VGA cable is analog so you'll only be able to get 1280x720 using it. It won't accept a 1080i/p signal.

If you want 1080i you'll have to use the component cables.

#3 Synconious

Synconious

    X-S Enthusiast

  • Members
  • 3 posts

Posted 04 May 2007 - 02:36 AM

Thanks, however the TV will in fact support 1080p over analog, i know what the manual says, its been done by many people with this specific tv and series of tv. I guess i was just asking if anyone had ever seen issues with the xbox not outputting at all. I'll have to try a new dvi to vga adapter.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users