Jump to content


Photo

47dj Drive In Mode-b


  • Please log in to reply
6 replies to this topic

#1 Kalaskulan

Kalaskulan

    X-S Enthusiast

  • Members
  • 25 posts

Posted 14 May 2007 - 06:42 PM

I was wondering how you guys with Hitatchi drives rom ver:47DJ manged to get it into mode-b so it showed up in windows. I have tryed loads of ways and can't achive it howeaver i try. I am running Windows xp Media Centre, does that make a difference? Would be nice if you could help me out here. Please try and be so detailed as possible tongue.gif
-Thomas

#2 I Bac0n I

I Bac0n I

    X-S Senior Member

  • Members
  • PipPip
  • 198 posts
  • Xbox Version:v1.6
  • 360 version:v4.0 (jasper)

Posted 14 May 2007 - 07:02 PM

got my cousins 47dj into mode-b with slax and had no problems getting it detected in windows.

#3 dirtymurt

dirtymurt

    X-S Enthusiast

  • Members
  • 16 posts

Posted 14 May 2007 - 07:03 PM

I now use the xeno connectivity kit, cost 9.99 and works like a charm. Plug your drive into the connector and a molex plug to the other side, then connect a SATA cable to your drive from your motherboard. power on pc, press the modeb button and hey presto drive appears in windows.

I have in the past used the 2 wire trick, well detailed, try searching, this worked perfectly but your sphincter twitches a bit. spend the 9.99 is my advice

#4 arron5

arron5

    X-S Enthusiast

  • Members
  • 7 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 14 May 2007 - 07:51 PM

I tired slax but would not boot so good old 2 wires crossed with no resister coz didn't have 1 biggrin.gif done the job.

#5 Software2

Software2

    X-S Genius

  • Members
  • PipPipPipPip
  • 898 posts
  • Location:USA
  • Interests:Computing, gaming, and uh... is there anything else in life?
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 14 May 2007 - 08:53 PM

Be afraid of crossing the wires! Be very afraid! tongue.gif

Connectivity kit has done the job for me time and time again.

#6 teamninja

teamninja

    X-S Enthusiast

  • Members
  • 20 posts

Posted 15 May 2007 - 12:32 AM

I used the X360 USB Connectivity Kit v2 with no problems.

#7 Refferehtom

Refferehtom

    X-S Senior Member

  • Members
  • PipPip
  • 160 posts
  • Location:Red Sox Nation
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 15 May 2007 - 12:48 AM

I did this drive 3 nights ago, use the latest slax cd, if it hangs when slax tries to boot, eject your tray on your 360 drive, you should be all set after that.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users