Jump to content


Photo

Ms28 Samsung Question


  • Please log in to reply
4 replies to this topic

#1 BOVA80

BOVA80

    X-S Member

  • Members
  • Pip
  • 94 posts
  • Xbox Version:v1.0

Posted 22 June 2007 - 04:51 AM

I have a ms28 toshiba samsung drive and tried to read the firmware using ipreps idump but i got the error port: fe00, master/slave: a0 after i select 1 for primary master. any suggestions? i have intel serial ata that is built in motherboard. dell e510 computer. the drive has never been flashed. also drive still works because it is able to play games.

Edited by BOVA80, 22 June 2007 - 04:55 AM.


#2 pure_bluff

pure_bluff

    X-S Member

  • Members
  • Pip
  • 85 posts

Posted 22 June 2007 - 04:58 AM

Try using the 10sec trick correctly.

#3 BOVA80

BOVA80

    X-S Member

  • Members
  • Pip
  • 94 posts
  • Xbox Version:v1.0

Posted 22 June 2007 - 11:40 AM

i dont know if that will work cause as soon as i hit the 1 key and enter it shows the port: fe00, master/slave: a01

#4 flash360

flash360

    X-S X-perience

  • Members
  • PipPip
  • 373 posts
  • Location:heywood
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 22 June 2007 - 01:05 PM

Im gettin sick of explainin this but here we go again tongue.gif
An ms 28 has firmgaurd so you need to do the 10 sec trick. Turn the xbox off BEFORE pressing the 1 key and back on 10 sec after pressing 1 (presumin 1 is ur xtreme pri master). This only works with a via 6421 sata card. As the drive hasnt been flashed before the 0800 disc will not work either.

#5 BOVA80

BOVA80

    X-S Member

  • Members
  • Pip
  • 94 posts
  • Xbox Version:v1.0

Posted 22 June 2007 - 01:09 PM

so basically i need that sata card since i have intel? ,.....

edit: ordered it

Edited by BOVA80, 22 June 2007 - 01:22 PM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users