Jump to content


Photo

Networking With Slayers 2.1


  • Please log in to reply
6 replies to this topic

#1 Caldine

Caldine

    X-S Young Member

  • Members
  • Pip
  • 39 posts

Posted 01 June 2003 - 09:33 PM

OK , please dont flame , I researched the board and still haven't come to a conclusion on networking to my Xbox.

I am running XP Pro with 2 NIC cards. 1 is for my ADSL connection , the other to connect to the Xbox.

TCP/IP settings for the ADSL NIC are Obtain IP Address Automatically .

As i have installed EVOX with Slayers 2.1 , the default IP is 192.168.1.200. Line status is 100/Full Duplex .
Setup Network : Yes
Use Static IP : Yes
IP : 192.168.1.200
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
DNS 0.0.0.0
DNS 0.0.0.0
Setup Delay 5

On the Xbox NIC TCP/IP Config I have :

IP Address 192.168.1.201
Sunet Mask 255.255.255.0
Default gateway 192.168.1.1

Flash XP Settings 192.168.1.200

When I have the crossover cable connected to the Xbox , ADSL will not work until the connection to the Xbox is disconnected.

What am I doing wrong .

Thanks


#2 Bleemster

Bleemster

    X-S Enthusiast

  • Members
  • 3 posts

Posted 01 June 2003 - 10:46 PM

try changing you gateways on both evox and nic for the xbox to the same ip as the ip as the ip of the xbox nic 192.168.1.201
-

#3 lebriznon

lebriznon

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,278 posts
  • Location:Vancouver, B.C.
  • Xbox Version:v1.0

Posted 01 June 2003 - 10:46 PM

try making the NIC of the computer (the one going to xbox)
ip: 192.168.1.1
subnet: 255.255.255.0
default gateway: leave it blank.

in flashfxp, connect to 192.168.1.200
username: xbox
password: xbox

(note that you dont need adsl to ftp to the xbox anyways)

#4 Caldine

Caldine

    X-S Young Member

  • Members
  • Pip
  • 39 posts

Posted 02 June 2003 - 01:06 AM

Thanks , but tried all that .

The Reason I mentioned no ADSL was only incase I had some sort on conflict between the 2 NIC's.

Anyone else have some suggestions.

#5 Caldine

Caldine

    X-S Young Member

  • Members
  • Pip
  • 39 posts

Posted 02 June 2003 - 05:00 AM

OK, sussed it out . All i had to do was remove the cable from the NIC going to my router , and away it went.

Thanks for the replies. biggrin.gif

#6 Caldine

Caldine

    X-S Young Member

  • Members
  • Pip
  • 39 posts

Posted 02 June 2003 - 05:02 AM

Thanks for the replies , got it all sussed . I just had to remove the cable running from the 1st NIC going to my router.

#7 leisenstein

leisenstein

    X-S X-perience

  • Members
  • PipPip
  • 451 posts

Posted 02 June 2003 - 05:16 AM

I guess he won't be going online. blink.gif




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users