Jump to content


Photo

Spoofed Hitachi 59 To Samsung Ms28 Now How To Flash To Xtreme 5.2


  • Please log in to reply
4 replies to this topic

#1 slappy_squirel

slappy_squirel

    X-S X-perience

  • Members
  • PipPip
  • 387 posts

Posted 01 July 2007 - 08:06 AM

I followed these instructions
http://360hax.com/pa...?5#Hitachispoof

Sucessfully flash so hitachi drive works with samsung mobo

Do I follow samsung flashing instructions or hitachi flashing instructions to play my backups wont be using live wanted to get extreme 5.2 on this

Thanks

#2 Xx The 0ne xX

Xx The 0ne xX

    X-S Member

  • Members
  • Pip
  • 136 posts
  • Xbox Version:v1.5
  • 360 version:v1 (xenon)

Posted 01 July 2007 - 08:09 AM

you will want to rip ur backups so they work with hitachi. ur dvd drive is a hitachi drive, ur just making the motherboard think its a samsung so it will work.

#3 slappy_squirel

slappy_squirel

    X-S X-perience

  • Members
  • PipPip
  • 387 posts

Posted 01 July 2007 - 08:15 AM

After I flash it I am having issues getting into mode b again
When I tried the slax cd it stops at a differnt spot it doesnt stop at "spinng up disk"
It stops at "looking for data modules"

Edited by slappy_squirel, 01 July 2007 - 08:31 AM.


#4 myfranco

myfranco

    X-S Genius

  • Members
  • PipPipPipPip
  • 820 posts
  • Location:Turkey-Istanbul
  • Xbox Version:v1.6
  • 360 version:v1 (xenon)

Posted 01 July 2007 - 11:20 AM

Connect the sata cable to pc and open the tray.Unplug power cable (of 360 not dvd power cable) so dvd tray stays open.Turn 360 then pc on and boot.You're on modeB and that means you don't have to use slax cd since this is called "tray tweak" to put a flashed drive into modeB

#5 slappy_squirel

slappy_squirel

    X-S X-perience

  • Members
  • PipPip
  • 387 posts

Posted 01 July 2007 - 03:06 PM

Since it has a regular spoofed ms28 firmware is the tray tweak applied?
IT was orginally modded with C4EVA_XTRM-HITACHI_v2_4_Stealth then I restored the orignal flash then I used Maximus Firmwaretoolbox 3.1 and spoofed the orignal firmware with MS28 since it was a samung mobo

I booted with the tray open and it still isnt working
When you say "Turn 360 then pc on and boot" shoud I just let the pc start up or should I out in a game in the xbox when you say boot

Edited by slappy_squirel, 01 July 2007 - 03:09 PM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users