Jump to content


Photo

New Smartxxv3 Frags


  • Please log in to reply
1 reply to this topic

#1 M-Azing

M-Azing

    X-S Enthusiast

  • Members
  • 1 posts

Posted 24 October 2007 - 01:39 AM

Perfect Install of SmartxxV3, Using a Spider, 1.6 box
I turn it on and it just FRAGS, Checked all of the pins and they're in correctly
Removed and replaced them all like 6 or 7 times, So Finally, I removed the Chip
Leaving the spider in and it boots like a regular xbox, working just fine
and the blue led on the spider is on so it's still connected
Now, for my question... I broked of the D0 on the chip, originally it was going into a 1.0 box.
And decided against that and it has never been used, So do I need to solder the D0 point to the board?
I'm not going to use the LPC rebuild because if the chip is bad then It was a giant waste of time.
but if the D0 point needs to be soldered in thats fine, but I dont want to do it unless I have to because
Solder looks ugly :/

#2 mtsaint

mtsaint

    X-S Senior Member

  • Members
  • PipPip
  • 205 posts

Posted 05 December 2007 - 10:10 AM

yeah the lack of a D0 soldier point will cause the xbox to frag




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users