I installed a red HDD activity LED above controller port 2 and a blue LAN activity LED above controller port 3. I drilled a 1/4" hole into the number "2" and through the metal shield. Then, I drilled a hole in the number "3" and used the hole already in the shield for the power/eject board for the LAN wire. I mounted the LEDs with Snap-In Panel Mount LED Holders from Radio Shack.
Here are 2 photos of the finished product, click to enlarge:
They are brighter than I thought they would be, but they work perfect.
- Yes, that is a Wii.
- That is a USB dongle in port 3.
- The top Xbox is not being used at the moment.
- I also switched the wires for the power and eject buttons. Role Reversal!
Edited by throwingks, 28 December 2007 - 06:17 AM.