Problem Flashing Benq 1.4
Posted 12 February 2008 - 05:55 AM
I went into windows and used the makefirmware.cmd and it said everything was successful and gave me the modified firmware
So I went to flash it to my 360 and it tells me that the file size is wrong
I don't know what I can do to fix it
Posted 12 February 2008 - 04:05 PM
If you are happy with the key, copy it in FW toolbox, then open the iXtreme 1.41 bin file and paste in the the key, save this file to the floppy or USB stick etc.... You should be able to flash this file to the drive and you will be all set...
Edited by podger, 12 February 2008 - 04:06 PM.
Posted 12 February 2008 - 07:10 PM
If you are new, do it all manually - this way you understand it more and know what to look for.
It sounds to me like you have dumped the firmware off of a Hard Drive or DVD Drive.
Try removing these, or if using an NTFS4DOS cd remving all but the one used for booting.
Posted 12 February 2008 - 07:25 PM
There was no problem in reading the firmware to my disc
I went to flash it to my 360 and it tells me that the file size is wrong
FYI, if you are dumping the firmware to a floppy disk and you don't have enough free space, it will result in a partial dump.
Edited by Toddler, 12 February 2008 - 07:26 PM.
Posted 12 February 2008 - 07:42 PM
Posted 13 February 2008 - 04:20 AM
Either way I got it flashed and it reads backups
Thanks a lot guys x 100000
btw I was using a floppy
Posted 13 February 2008 - 06:49 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users