Jump to content


Photo

Need Some Tools 4 Benq Drive


  • Please log in to reply
5 replies to this topic

#1 MAX-240

MAX-240

    X-S Enthusiast

  • Members
  • 15 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 22 March 2008 - 06:05 PM

hey , how is it
blink.gif

am having a problem with the benq drive, i need ixtream 1.4 and the way to flash a benq driver

- i did flash i hetachi drive before but am kinda nOOb in benq stuff so help plz


#2 mr-blonde

mr-blonde

    X-S Member

  • Members
  • Pip
  • 139 posts
  • Location:Peterborough ENGLAND
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 22 March 2008 - 08:51 PM

the easiest way to flash a Benq drive is to use ''Iprep'' think the newest version is 106
you can find it at xbins along with the firmware just read the readme that comes with iprep.
pretty sure you will need a via sata chipset to flash a Benq

#3 MAX-240

MAX-240

    X-S Enthusiast

  • Members
  • 15 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 23 March 2008 - 06:38 PM

Hey again

I follow those steps exactly

First

from the text book
QUOTE
Turn on the Xbox 360 and wait 2 or more seconds, status toggles between 0x51 and 0xD1


this was going fine

and then
QUOTE
Turn off the Xbox 360 and wait 2 or more seconds, status will stay at 0xD1.


this aslo was ok

and here is the problem
QUOTE
Turn on the Xbox 360, you should get a good drive status 0x73 and reading should begin automatically.

after i turn on the xbox360 it returns again to toggle between 0x51 and 0xD1 Without proceed with the last step which is 0x73 ,
The question is

Did I miss something while am doing the flash


Note that my benq drive is new and never been flashed before

and am using iprep101

#4 MAX-240

MAX-240

    X-S Enthusiast

  • Members
  • 15 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 23 March 2008 - 10:01 PM

huh.gif
another thing

at the text book it says that you have to use VIA sata card to mod the xbox360

am using a diffrent card
IPB Image

and as you can see it works ok

see where is the problem ?

please any one help?

#5 I Bac0n I

I Bac0n I

    X-S Senior Member

  • Members
  • PipPip
  • 198 posts
  • Xbox Version:v1.6
  • 360 version:v4.0 (jasper)

Posted 24 March 2008 - 05:51 AM

That card is only supported for samsung ms25 drives, you need a via card. I recommend the 6421A its about $15 shipped from ebay.

#6 MAX-240

MAX-240

    X-S Enthusiast

  • Members
  • 15 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 24 March 2008 - 05:35 PM

i want to make sure that this is the right card
IPB Image

IS IT ?




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users