Jump to content


Photo

Internal HDD


  • Please log in to reply
4 replies to this topic

#1 pigbait

pigbait

    X-S Senior Member

  • Members
  • PipPip
  • 226 posts
  • Xbox Version:v1.6
  • 360 version:v1 (xenon)

Posted 10 May 2008 - 04:03 AM

hey guys i want to install my stock HDD inside my 360 there is a nice tut on hear that i was following butt the pic that tell you where to solder your power and sata wire is not there. Dose any one have a pic of the pin out???

#2 Bandit5317

Bandit5317

    X-S Genius

  • Members
  • PipPipPipPip
  • 881 posts

Posted 10 May 2008 - 06:37 AM

Here's a picture that has the Sata pinout:

IPB Image

I believe the pins above 6, 5, and 4 are all 5v and the pins above 3, 2, and 1 are ground, but you might want to check that with a multimeter or just us another 5v source.

Edited by Bandit5317, 10 May 2008 - 06:38 AM.


#3 pigbait

pigbait

    X-S Senior Member

  • Members
  • PipPip
  • 226 posts
  • Xbox Version:v1.6
  • 360 version:v1 (xenon)

Posted 11 May 2008 - 10:40 PM

ok that help but where do i solder my sata data cable what are the pins for that??? power is not hard to find but data pin out is hard with no tut anymore

#4 popballz

popballz

    X-S Senior Member

  • Members
  • PipPip
  • 238 posts
  • Interests:myself of course
  • Xbox Version:unk
  • 360 version:v1 (xenon)

Posted 12 May 2008 - 05:00 AM

you should check the tutorial in my sig


but that pic pretty much explanes the sata cable, there is 7 wires and 7 pins to solder to, they are numbered in that picture, #7 on the cable is on the side with the dip

#5 CollinstheClown

CollinstheClown

    X-S Member

  • Members
  • Pip
  • 135 posts
  • Location:Glenolden, PA
  • Interests:Modding, Computer repair/maintenance/upgrading, LASERs
  • Xbox Version:v1.4
  • 360 version:v5.0 (360S - trinity)

Posted 12 May 2008 - 10:12 PM

Theres actually 8 wires, the center 2 are GND and combinded in the SATA connector to create pin 4. But you already know that ballz. smile.gif




-CollinstheClown

Edited by CollinstheClown, 12 May 2008 - 10:12 PM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users