Jump to content


Photo

Several Complete Systems Non Working And Misc. Parts


  • Please log in to reply
33 replies to this topic

#1 metalmaster06

metalmaster06

    X-S Member

  • Members
  • Pip
  • 81 posts
  • Location:Utah
  • Xbox Version:v1.4
  • 360 version:none

Posted 15 August 2008 - 11:01 PM

Your one stop shop for those last few parts to finish your project.

Consoles can be parted out or sold as a lot. Just let me know what you need. PMs are welcome, i'll be checking back several times each day. Make me some offers.

Here's the list.

box 1
1.6 mobo non working suspected eeprom/lpc problems
has xecuter 1.6 rebuild pcb installed w/ pinheader
thomson dvd w/ bezel
1.6 psu working
pair con ports 1 short 1 long
complete case w/ shielding, dvd/hdd caddy, power/eject board, and fan

box 2
1.0 mobo non working
pinheader installed w/ xenium d0/ground harness
hitachi lg dvd drive w/ bezel
1.0 psu working foxlink
seagate hdd locked, not sure if to this mobo
ide cable
dvd power cable
pair con ports both long w/ daughterboard
complete case w/ shielding, dvd/hdd caddy, power/eject board, and fan

box 3
1.0 mobo non working
used for parts, removed PIC16
has good ram
thomson dvd w/ bezel
pair con ports both long, 1 port damaged during led install
working daughterboard
2 dvd power cable
ide cable
complete case w/ shielding, dvd caddy, power/eject board, and fan

box 4
1.0 mobo non working
PIC16 replaced poorly
pinheader/d0 wire installed
1.0 psu working
seagate hdd locked to mobo
pair con ports both long w/ daughterboard
complete case w/ shielding, dvd/hdd caddy, power/eject board, and fan
ide cable
dvd power cable

box 5
1.1 mobo non working
trace/via damage/repair
suspected damaged tsop/eeprom
1.1 psu working
philips dvd w/ bezel
western digital hdd, locked but not to this mobo
pair con ports both long
ide cable
dvd power cable
complete case w/ shielding, dvd/hdd caddy, power/eject board, and fan

Misc parts
1 good condition OEM black case w/ led diffuser bar installed for status led
includes bezel and jewel
no power/eject board or shielding

1 OEM breakaway dongle for xbox controllers
2 OEM A/V packs (not hi def)
1 Xbox Live Communicator puck/headset
9 t-taps press on connectors for 18-14 guage wire
1 solder on eeprom reader built from scratch w/ 9 pin serial port
2 sets 6 long case screws
1 xecuter 2.3 lite pro w/ external switch assembly
1 12 pin pinheader new
2 pairs oem bicolor leds red/green for p/e boards
5 team xodus usb adapters, plug adapter into normal controller port, and then plug in usb device. also suitable for permanent install
1 xecuter 1.6 rebuild pcb
1 x3CE wires install harness
1 x3ce alternate power wire
1 xenium d0/ground wire harness
1 blue ring of light diffuser from blue xcm case
2 sets mobo/case screws
4 oem seagate hdds locked
2 oem WD hdds locked

Thanks for looking!

#2 MiamiBiker305

MiamiBiker305

    X-S Senior Member

  • XS-BANNED
  • PipPip
  • 277 posts
  • Xbox Version:v1.4
  • 360 version:v4.0 (jasper)

Posted 16 August 2008 - 12:46 AM

Do you Happen To Have any Xbox Jewels?
Or anybody? Looking for 2 Of them.
happy.gif

#3 metalmaster06

metalmaster06

    X-S Member

  • Members
  • Pip
  • 81 posts
  • Location:Utah
  • Xbox Version:v1.4
  • 360 version:none

Posted 16 August 2008 - 06:41 AM

each of the six cases I have listed have the stock jewels on them. I would rather sell the whole case with the jewels. I don't have the time to pop them off.

I'll let most of this stuff go cheap... Make an offer

#4 MoonTar

MoonTar

    X-S Young Member

  • Members
  • Pip
  • 58 posts
  • Xbox Version:v1.0
  • 360 version:v5.0 (360S - trinity)

Posted 16 August 2008 - 05:29 PM

How much for a working dvd drive parted out? I don't care which kind it is, I just need a working one.

#5 Beauregardy

Beauregardy

    X-S Member

  • XS-BANNED
  • Pip
  • 94 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 17 August 2008 - 05:35 AM

Can i get pics of #2?

#6 metalmaster06

metalmaster06

    X-S Member

  • Members
  • Pip
  • 81 posts
  • Location:Utah
  • Xbox Version:v1.4
  • 360 version:none

Posted 18 August 2008 - 08:53 AM

I'll see if I can get some pics up tomorrow as per request. not sure how much good they will do as the box is complete, just non working w/ case in good condition.

moontar, pm replied.

thanks for looking

#7 metalmaster06

metalmaster06

    X-S Member

  • Members
  • Pip
  • 81 posts
  • Location:Utah
  • Xbox Version:v1.4
  • 360 version:none

Posted 18 August 2008 - 10:49 PM

Pics of box2 as per request.

Front
IPB Image

Top
IPB Image

Drives
IPB Image

Mobo/PSU
IPB Image

Philips dvd drive pending

Thanks for looking!

#8 metalmaster06

metalmaster06

    X-S Member

  • Members
  • Pip
  • 81 posts
  • Location:Utah
  • Xbox Version:v1.4
  • 360 version:none

Posted 19 August 2008 - 08:48 PM

2 all meat patties, special sauce, lettuce, cheese, pickles, onions on a sesame seed BUMP jester.gif

EDIT: almost forgot the onions

Edited by metalmaster06, 19 August 2008 - 08:49 PM.


#9 PandaExpress

PandaExpress

    X-S Young Member

  • Members
  • Pip
  • 38 posts

Posted 20 August 2008 - 07:44 AM

hi
How much for a 1.0 PSU shipped?

thanks

#10 metalmaster06

metalmaster06

    X-S Member

  • Members
  • Pip
  • 81 posts
  • Location:Utah
  • Xbox Version:v1.4
  • 360 version:none

Posted 20 August 2008 - 09:06 AM

Panda PM sent

#11 metalmaster06

metalmaster06

    X-S Member

  • Members
  • Pip
  • 81 posts
  • Location:Utah
  • Xbox Version:v1.4
  • 360 version:none

Posted 21 August 2008 - 01:03 AM

Philips dvd drive sold

#12 metalmaster06

metalmaster06

    X-S Member

  • Members
  • Pip
  • 81 posts
  • Location:Utah
  • Xbox Version:v1.4
  • 360 version:none

Posted 21 August 2008 - 11:55 PM

v1.0 PSU pending

#13 metalmaster06

metalmaster06

    X-S Member

  • Members
  • Pip
  • 81 posts
  • Location:Utah
  • Xbox Version:v1.4
  • 360 version:none

Posted 24 August 2008 - 02:14 AM

1.0 Psu sold

Make me some offers!

Thanks for looking.

#14 metalmaster06

metalmaster06

    X-S Member

  • Members
  • Pip
  • 81 posts
  • Location:Utah
  • Xbox Version:v1.4
  • 360 version:none

Posted 25 August 2008 - 09:32 AM

Everything's still here minus the philips dvd and a 1.0 psu.

All offers considered.
Paypal accepted.

Let me know what you need!
Thanks for looking.

#15 metalmaster06

metalmaster06

    X-S Member

  • Members
  • Pip
  • 81 posts
  • Location:Utah
  • Xbox Version:v1.4
  • 360 version:none

Posted 27 August 2008 - 10:02 AM

OEM case lid and dvd drive pending.

Still piles of parts here, waiting for your PMs.

I welcome all offers.
Paypal accepted.

Thanks for looking.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users