Jump to content


Photo

9v Solder Points?


  • Please log in to reply
2 replies to this topic

#1 TheFlyingBook

TheFlyingBook

    X-S Enthusiast

  • Members
  • 2 posts

Posted 19 August 2008 - 12:52 AM

I have a 360, that i did the 9 volt mod on, but the solder point i used causes the 360 to RROD. Can somebody make a detailed picture of the board showing the 9v solder points please? Thanks in advance.
(This is the 9v point Pic)
(credit to grim187 for the pic)

#2 josiah1992

josiah1992

    X-S Senior Member

  • Members
  • PipPip
  • 187 posts
  • Location:united kingdom
  • Xbox Version:unk
  • 360 version:v1 (xenon)

Posted 19 August 2008 - 01:01 AM

i didnt think that there were on 9v power sources, but i could be wrong. anyways back to your problem. when i 9v my 360, i soldered the positive wire to 12v and the negative to 3.3v. this gives u the difference of 8.7 which is close 9v.
you can find all the good power sources here ---> Power sources (credits to RDC of course)
hope this helps mate biggrin.gif

Edited by josiah1992, 19 August 2008 - 01:02 AM.


#3 TheFlyingBook

TheFlyingBook

    X-S Enthusiast

  • Members
  • 2 posts

Posted 19 August 2008 - 03:25 AM

QUOTE(josiah1992 @ Aug 18 2008, 08:37 PM) View Post

i didnt think that there were on 9v power sources, but i could be wrong. anyways back to your problem. when i 9v my 360, i soldered the positive wire to 12v and the negative to 3.3v. this gives u the difference of 8.7 which is close 9v.
you can find all the good power sources here ---> Power sources (credits to RDC of course)
hope this helps mate biggrin.gif

Could i have a pic? I'm kind of a noob, and it would really help.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users