Jump to content


Photo

Solderless Frag When In


  • Please log in to reply
4 replies to this topic

#1 Royal2000H

Royal2000H

    X-S Enthusiast

  • Members
  • 7 posts

Posted 13 October 2008 - 11:01 AM

Okay, So I have the Xenium, it's been working fine.
I moved a few weeks ago, and now when I turn my xbox on, it reboots twice and then on, but nothing happens.
I get Red+Green in the front.
My Xenium has a solid red light the whole time.

If I pull the xenium out (even leaving the solderless adapter screwed in)
the xbox turns on fine to the microsoft dashboard.

Put the xenium back in = FRAG again.

I've tried researching but I couldn't find what problems (or rather, solutions) corresponded directly to my problem.

#2 CuoreAnnerito85

CuoreAnnerito85

    X-S Enthusiast

  • Members
  • 1 posts
  • Location:Daytona Beach FL
  • Interests:Games, Modding, and Creating
  • Xbox Version:v1.1
  • 360 version:none

Posted 26 January 2009 - 03:47 PM

Man I know exactly how you feel...my xhip decided to just stop working too. I was playing Halo and reset my Xbox...then it didn't boot. Now it's stuck in FRAG...my only option it looks like is to get another chip...unless I find the problem

#3 steveo1978

steveo1978

    Super Moderator

  • Head Moderator
  • PipPipPipPipPip
  • 1,966 posts
  • Location:north carolina
  • Xbox Version:v1.2
  • 360 version:v4.0 (jasper)

Posted 26 January 2009 - 07:55 PM

check and make sure the solderless adapter is seated correct

#4 cnh4

cnh4

    X-S Enthusiast

  • Members
  • 1 posts

Posted 15 March 2009 - 12:22 AM

I had the same exact issue...what fixed it for me was I placed my modchip in recovery mode(flipping switch on chip) and then I created an iso CD with the 2.3.1 ( XOS_2_3_1_Recovery.iso to be exact) Xenium on it...After restarting the Xbox with the CD already in , the XOS should be reloaded and the xbox should reboot. Next, I took my modchip out of recovery mode and all was well from there..Apparently the XOS got corrupted even the my BIOS that I had stored in one of the memory banks was just fine. Anyway, hope that helps..


QUOTE(Royal2000H @ Oct 13 2008, 06:37 AM) View Post

Okay, So I have the Xenium, it's been working fine.
I moved a few weeks ago, and now when I turn my xbox on, it reboots twice and then on, but nothing happens.
I get Red+Green in the front.
My Xenium has a solid red light the whole time.

If I pull the xenium out (even leaving the solderless adapter screwed in)
the xbox turns on fine to the microsoft dashboard.

Put the xenium back in = FRAG again.

I've tried researching but I couldn't find what problems (or rather, solutions) corresponded directly to my problem.



#5 etwood

etwood

    X-S Enthusiast

  • Members
  • 4 posts

Posted 13 April 2009 - 09:23 PM

I have a solderless xenium (ice?) installed- it used to boot to the evox/avalaunch bios, but something happened and now it only boots to error 16. I recently became able to get into the xenium bios through the eject button start trick. When I flip it into recovery mode, it FRAGS, and even my bios dvd will not work. I had the opposite problem with another (soldered) xenium, except it fragged when NOT in recovery mode. I believe it is installed properly, as the leds all work, it used to go into the bios all fine but would not run any software- it just freezes at a blank screen.

is there a different bios disc i need to create, because i used the solder-older-xenium disc to "fix" the solderless 'box= which did not work. i also tried useing xboxhdm to fix the error 16, but no success.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users