Jump to content


Photo

I Messed Up And Now I Need Help


  • Please log in to reply
11 replies to this topic

#1 Mr Wiggl3s

Mr Wiggl3s

    X-S Member

  • Members
  • Pip
  • 103 posts

Posted 10 December 2008 - 10:01 PM

I was playing around with bios because i have a 250 gig hdd and i couldn't find m8plus_16_67. I found iND'd 16_67 bios instead and started to play with the CFG editor and then implimented the CFG into the BIOS up'd and flashed it.

Now whenever i attempt to boot from the chip it starts flashing orange (bios i think) and whenever i do auto boot it loads the flash then restarts and then flashes orange.

Not good, but how do i go about fixing this...?

#2 Heimdall

Heimdall

    X-S Legend

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 5,749 posts
  • Location:UK
  • Xbox Version:v1.4
  • 360 version:v4.0 (jasper)

Posted 10 December 2008 - 10:49 PM

How is your Xbox modded - TSOP or chip? What version Xbox, which chip?

#3 Mr Wiggl3s

Mr Wiggl3s

    X-S Member

  • Members
  • Pip
  • 103 posts

Posted 10 December 2008 - 10:54 PM

1.6 Xenium ICE

I think me and you are pretty much one of a few that regularly post here.

#4 Heimdall

Heimdall

    X-S Legend

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 5,749 posts
  • Location:UK
  • Xbox Version:v1.4
  • 360 version:v4.0 (jasper)

Posted 10 December 2008 - 11:12 PM

I use iND.BIOS.5003 and it works fine, but I don't inject the config - I recall reading somewhere that the config inject is a bit buggy. But, more importantly, iND.BIOS doesn't have a version that supports the Xbox 1.6.......... that's probably why it isn't working!

If you boot with the eject button do you get to the Xenium OS Menu? What about if you press / hold the white button while the box is booting?

And there are loads of regular posters, it's just a bit quiet tonight!!!! smile.gif

Edited by Heimdall, 10 December 2008 - 11:13 PM.


#5 Mr Wiggl3s

Mr Wiggl3s

    X-S Member

  • Members
  • Pip
  • 103 posts

Posted 11 December 2008 - 12:20 AM

Hey that acutally worked! Thanks man!

And it's good to see people still post here. I really miss these old forums sad.gif

Want to stick around and help me with some BIOS problems lol?

#6 run088

run088

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,003 posts
  • Interests:rebuilding broken xboxes
  • Xbox Version:v1.0
  • 360 version:none

Posted 11 December 2008 - 12:44 AM

If the chip has a bank of 512 or bigger x2 5035 is the way to go.There are several versions of this bios and you mentioned having a 1.6 so make sure you find one like this

x2_5035_v16plus_512k.bin

By the way I use x25035 and IND bios both the ini and the cfg on these bios work perfect for me and all the xboxes I have built.And these bios would really be no better than any other bios without them.I am not even sure if custom partitioning is enabled without the x25035.ini or IND.cfg

#7 Mr Wiggl3s

Mr Wiggl3s

    X-S Member

  • Members
  • Pip
  • 103 posts

Posted 11 December 2008 - 01:23 AM

Good call on the X2 5035 thats the one im going to stick with now.

Do i need to format my G: partition? When i used the drive upgrade wizard on my xenium i formatted the F and the G.

I'm wondering if i can just setup the F for all 250 gigs, that'd save alot of trouble.

#8 Heimdall

Heimdall

    X-S Legend

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 5,749 posts
  • Location:UK
  • Xbox Version:v1.4
  • 360 version:v4.0 (jasper)

Posted 11 December 2008 - 01:40 AM

Depends which X2.5035 you used. X2.5035.v16plus.137 supports F and G, X2.5035.v16plus supports F only.

You can switch the BIOS from one to the other with x2ool - v1.0.4 is the latest version.

#9 Mr Wiggl3s

Mr Wiggl3s

    X-S Member

  • Members
  • Pip
  • 103 posts

Posted 11 December 2008 - 01:53 AM

the one from xbins only came with the 1.0-1.5 and the 1.6. I can't find 167. I used X2ool and config'd it so that it skips the DVD Check like i needed and and set up G to take the rest but it's still usuable

#10 Heimdall

Heimdall

    X-S Legend

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 5,749 posts
  • Location:UK
  • Xbox Version:v1.4
  • 360 version:v4.0 (jasper)

Posted 11 December 2008 - 02:03 AM

So you've got it set as a .67 BIOS - supporting partitions 6(F) and 7(G). If you want all F just select "Partition 6 Takes Rest of the Drive". smile.gif

Edited by Heimdall, 11 December 2008 - 02:07 AM.


#11 Mr Wiggl3s

Mr Wiggl3s

    X-S Member

  • Members
  • Pip
  • 103 posts

Posted 11 December 2008 - 02:33 AM

Hey man thanks dude i got it to work. I set it up and everything, the F was still registering as 120 gigs so i formatted it and now it's all there.

I wish there was some reputation system or something lol.

I started the day out thinking i would have to hook the HDD up to my comp now i have everything running right.. Thanks once again man.

#12 run088

run088

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,003 posts
  • Interests:rebuilding broken xboxes
  • Xbox Version:v1.0
  • 360 version:none

Posted 11 December 2008 - 02:57 AM

Or just use the ini and you can custom partition any sizes you want.Its the same way with IND and the cfg.

Use the ini file that comes with it.It has all the goodies you will want and more.It has the ability to customize everything you will most likely ever want or need.


Just drop it in the root of E

Edited by run088, 11 December 2008 - 02:59 AM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users