Jump to content


Photo

Toshiba Samsung Ms28 Problem...


  • Please log in to reply
6 replies to this topic

#1 hack_er4

hack_er4

    X-S Enthusiast

  • Members
  • 5 posts

Posted 22 February 2009 - 10:39 PM

hello friends,


i have a brand new Xbox 360 core (Pal, dvd region 5) console..(toshiba Samsung Ms28 Drive)
and trying to mod it....

and following the tutorial for above mentioned drive...

there is a problem while preparing my usd drive to through Xtreme boot maker v 0.3.6.14220

i am selecting a "xtrem51a.bin" as firmware but it shows me these error
http://img100.images...mage=select.jpg

If i select "yes" then it says sad.gif
http://img100.images...=yesoptionw.jpg


If i select "no" then it says sad.gif
http://img100.images...e=yesoption.jpg

what should i do next?

my pc configuration is-

xfx nvidia 780i 3-way sli motherboardboard

do i need via chipset sata pci card?(since some where in the forum i read ms28 can be flashed with nforce sata controller )
please smile.gif guide me what should i need to do to flash my drive(toshiba samsung ms28)

Edited by hack_er4, 22 February 2009 - 10:40 PM.


#2 ruley

ruley

    X-S Genius

  • Members
  • PipPipPipPip
  • 752 posts
  • Location:Queensland, Australia
  • Xbox Version:none
  • 360 version:v4.0 (jasper)

Posted 23 February 2009 - 01:58 AM

QUOTE(hack_er4 @ Feb 23 2009, 07:45 AM) View Post

hello friends,
i have a brand new Xbox 360 core (Pal, dvd region 5) console..(toshiba Samsung Ms28 Drive)
and trying to mod it....

and following the tutorial for above mentioned drive...

there is a problem while preparing my usd drive to through Xtreme boot maker v 0.3.6.14220

i am selecting a "xtrem51a.bin" as firmware but it shows me these error
http://img100.images...mage=select.jpg

If i select "yes" then it says sad.gif
http://img100.images...=yesoptionw.jpg
If i select "no" then it says sad.gif
http://img100.images...e=yesoption.jpg

what should i do next?

my pc configuration is-

xfx nvidia 780i 3-way sli motherboardboard

do i need via chipset sata pci card?(since some where in the forum i read ms28 can be flashed with nforce sata controller )
please smile.gif guide me what should i need to do to flash my drive(toshiba samsung ms28)

Try follow this guide:
http://www.360mods.n...xtbook.2008.pdf

#3 DaRkxFaDeD

DaRkxFaDeD

    X-S Young Member

  • Members
  • Pip
  • 39 posts
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 23 February 2009 - 07:14 AM

I also have the same motherboard and a ms28 drive. i did a successful flash with this tutorial with ixtreme1.5 firmware, and iprep. I did it with the onboard sata ports just fine so you shouldn't need a sata card.

http://www.klutsh.com/page.php?5

#4 hack_er4

hack_er4

    X-S Enthusiast

  • Members
  • 5 posts

Posted 23 February 2009 - 08:32 AM

Darkxfaded
Thanx For that tutorial
i followed it
i open iprep ad hit tha tab to load samsung firmware
i don]t know which firmware i need to load ?
but when i tried to load a samsung xtrem51a.bin (downloaded)
it says "No valid firmware loaded"
if i m doing some thing wrong or loading wrong file plz give me the link to download the right file to load....

#5 hack_er4

hack_er4

    X-S Enthusiast

  • Members
  • 5 posts

Posted 23 February 2009 - 08:57 AM

QUOTE(hack_er4 @ Feb 23 2009, 01:38 PM) View Post

Darkxfaded
Thanx For that tutorial
i followed it
i open iprep ad hit tha tab to load samsung firmware
i don]t know which firmware i need to load ?
but when i tried to load a samsung xtrem51a.bin (downloaded)
it says "No valid firmware loaded"
if i m doing some thing wrong or loading wrong file plz give me the link to download the right file to load....


i hav got the right firmware but

when
load the samsung firmware
but i that he says via controller selected
but as u say (i did it with the onboard sata ports just fine so you shouldn't need a sata card)
i am confused which controller to select
since there is a tab says "switch to ide based" when i hit that it gives me many option to select like
http://img5.imagesha...image=iprep.jpg

and if i switch to scsi based i only hav one to select scsi/raid host controller

plz tell me which one to select??


#6 ruley

ruley

    X-S Genius

  • Members
  • PipPipPipPip
  • 752 posts
  • Location:Queensland, Australia
  • Xbox Version:none
  • 360 version:v4.0 (jasper)

Posted 23 February 2009 - 10:35 AM

QUOTE(hack_er4 @ Feb 23 2009, 05:38 PM) View Post

Darkxfaded
Thanx For that tutorial
i followed it
i open iprep ad hit tha tab to load samsung firmware
i don]t know which firmware i need to load ?
but when i tried to load a samsung xtrem51a.bin (downloaded)
it says "No valid firmware loaded"
if i m doing some thing wrong or loading wrong file plz give me the link to download the right file to load....

That means that the definitions havn't being updated. And you do know that that is an old firmware version, if you want live dection features use ixtreme1.5

#7 hack_er4

hack_er4

    X-S Enthusiast

  • Members
  • 5 posts

Posted 23 February 2009 - 11:33 AM

QUOTE(ruley @ Feb 23 2009, 03:41 PM) View Post

That means that the definitions havn't being updated. And you do know that that is an old firmware version, if you want live dection features use ixtreme1.5

i hav got the right firmware but

when
load the samsung firmware
but i that he says via controller selected
but as u say (i did it with the onboard sata ports just fine so you shouldn't need a sata card)
i am confused which controller to select
since there is a tab says "switch to ide based" when i hit that it gives me many option to select like
http://img5.imagesha...image=iprep.jpg

and if i switch to scsi based i only hav one to select scsi/raid host controller

plz tell me which one to select??




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users