Mod Chip Ayrshir / Glasgow
Posted 27 February 2009 - 08:02 AM
Firmware Flash £25 all drives
Soft Mod ie Homebrew etc etc installed £25
All machines above serial LEH 125 XXXXXX £45
Latest Custom FW £10
Unbrick PsP £10
Latest Custom FW With 4g Memory Card £30
Plug and Play Carts Ready To Use £45
Magic Keys Installed And Swap Magic Discs £35
Flip Lid And Magic Swap £40
We also offer a repair service for consoles damaged by mod install or just not working and no warranty and we also buy and sell consoles but note we do not sell games period so dont ask ph34r.gif
All is not lost till you dont know what you have lost smile.gif check out my installers thread http://forums.xbox-scene.com
Posted 09 March 2009 - 05:47 PM
Edited by zoomerman, 09 March 2009 - 05:54 PM.
Posted 09 March 2009 - 07:49 PM
My son has a slimline ps2. Am wanting to get it running game backups. Can you help?
Edited by 99joe, 09 March 2009 - 07:53 PM.
Posted 02 April 2009 - 07:23 AM
Posted 09 May 2009 - 10:34 PM
laser replacement £75-90 depending on the laser type
fix the blinking red light £45
hard drive upgrades price deppends on size you like
new laser supply and fit £40
complete new drive supply and fit £80
new laser or drive supply and fit £40
RRoD repair £15
ALL REPAIRS ARE NO FIX NO FEE
Posted 30 June 2009 - 06:23 AM
Posted 03 November 2009 - 07:14 AM
Posted 14 May 2010 - 05:53 AM
Posted 27 May 2010 - 01:09 AM
I was just wondering where abouts in Glasgow you are based?
My 360 got the RROD a few months ago.. I have the error code 0102, which is :
0102 unknown error
* though it's most likely GPU related literally means the console does not know what is wrong. possibly a short or cold solder joint somewhere. So far there is 1 major theory for what causes most of these errors is that the Ram, CPU, or GPU are not soldered properly to the mother board due either to poor manufacturing or excessive heat up and cool down cycles that stress, weaken and eventually break the soldered connection.
Would you be able to fix this? I've been told what I have to do is reflow and then the x-clamp, but I've never opened up my 360 so I wouldnt know what to do lol.
How much would you charge if you were able to do it? Plus flashing it too?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users