Mine will not be identical (it will only have 1 controller port on the front, i am using a v1.1 xbox, i will be using a proximity/reed switch for the power switch) and the dimensions will be slightly different as i had to guess most of it.
Done so far:
Cut base, top, side and back pieces of 3mm plexi to size:
made 2mm motherboard mounts:
Fit the first iceberq (im waiting for the other to arrive) and fitted a second fan header:
Made a wooden "mould" to bend the side piece of plexi around:
Started working on the pico psu (PW200-M) and sickmods atx to xbox adaptor:
Made a HDD mount for a 250gb laptop hard drive (no pic)
I will be using this wifi bridge (the pcb inside is exactly the same as the one ghostavel used in his mini):
And finally a test layout:
Overall outer dimensions are slightly smaller than ghostavels:
Ive also made a custom bios with "xbmc" instead of "xbox" on the splashscreen and flashed it to the TSOP.
I'll update when ive got more done (i have to cut the vents on the side pieces by hand (all my cuts are by hand, no lasercutting here lol) so dont expect my progress to be rapid.
Edited by MasterGouken, 22 March 2009 - 01:36 AM.