Jump to content


Photo

I Need Help Making A Flashing Solution For All Drives...


  • Please log in to reply
2 replies to this topic

#1 haris2887

haris2887

    X-S X-perience

  • Members
  • PipPip
  • 395 posts
  • Location:The bush in your Back yard
  • Xbox Version:v1.0
  • 360 version:unknown

Posted 29 April 2009 - 06:11 AM

hi all...
I am currently working on a Flashing solution for all drive..
The goal is to bypass the Xbox powering the Drive and have everything powered by the PSU in the PC...

here is what i have so far..


not the picture is not mine, i just edited it with a few lines just for a rough sketch...

IPB Image

i need to know a few things..

----The value for the CAP on the output of the LM3940...

----The value for the CAP on the Ground on the LM3940..

and most importantly will it work, 1A supply to the DVD rive is enough don't u Think ?


#2 ROBJETS

ROBJETS

    X-S Young Member

  • Members
  • Pip
  • 48 posts

Posted 29 April 2009 - 06:21 AM

Just my opinion I really dont see the point. You still have to access the sata port hich means still taking the case apart .
I suggest you just by a 360Blaster instead and then you never have to take the 360 apart again to flash and you use a molex power supply so the drive isnt powered by the 360 during flashing

#3 haris2887

haris2887

    X-S X-perience

  • Members
  • PipPip
  • 395 posts
  • Location:The bush in your Back yard
  • Xbox Version:v1.0
  • 360 version:unknown

Posted 29 April 2009 - 06:35 AM

no ..
ppl with a VIA card don't have to take the case apart... ...
and now days everyone seems to be using a VIA card because it is the only one that work for all drives without opening then Except for Liteon ofcourse..

and the blaster isnt exactly cheap at $90AUD.
the one about would cost no more than maybe $10 AUD max...




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users