Jump to content


Photo

Bad Flash


  • Please log in to reply
4 replies to this topic

#1 lou19

lou19

    X-S Enthusiast

  • Members
  • 16 posts

Posted 06 June 2009 - 06:22 AM

Hey,so i recently installed my modchip into my xbox and that was evox m8.However i can bootup the normal one fine and i can use the other bank but im scared to what do i do?

#2 deilzfcjk

deilzfcjk

    X-S Genius

  • Members
  • PipPipPipPip
  • 828 posts
  • Location:San Francisco
  • Interests:chicks, fixing my car and computers, working on websites, relaxing.
  • Xbox Version:v1.6
  • 360 version:v4.0 (jasper)

Posted 10 June 2009 - 11:01 PM

So what are you afraid of? Just flash the other bank with a evox m8.

#3 XBOXCUSTOMS69

XBOXCUSTOMS69

    X-S Senior Member

  • Members
  • PipPip
  • 193 posts
  • Location:Minnesota, USA
  • Interests:XBOX, PS3, PSP, PS2
  • Xbox Version:v1.1
  • 360 version:unknown

Posted 11 June 2009 - 06:38 AM

Or instead of putting 2 banks with the SAME bios, you can flash the remaining bank with the Flashbios one. That way if you ever screw up the other one, you can reflash without needing a second chip, or you can use it to flash other chips. I would AT LEAST use a different bios in that one, possibly for experimentation. Or go with the highly configurable newer versions of the X2 bios.

#4 seriouslysilly

seriouslysilly

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,687 posts
  • Location:East Coast baby!!!
  • Xbox Version:v1.4
  • 360 version:none

Posted 16 June 2009 - 07:05 PM

i also leave the other bank a flashbios for safety purposes.
you never know when someone accidentally flashes the current bank.

with a fresh install of the duox, i boot to the flash bios screen. just before i flash, i flip the switch to flash the other bank. this way i still have the flashbios on the other bank.

#5 litspliff

litspliff

    X-S X-perience

  • Members
  • PipPip
  • 395 posts
  • Location:nebraska
  • Interests:electronics, music, your sister.
  • Xbox Version:v1.0
  • 360 version:none

Posted 26 June 2009 - 03:53 AM

QUOTE(seriouslysilly @ Jun 16 2009, 01:05 PM) View Post
i also leave the other bank a flashbios for safety purposes.
you never know when someone accidentally flashes the current bank.

with a fresh install of the duox, i boot to the flash bios screen. just before i flash, i flip the switch to flash the other bank. this way i still have the flashbios on the other bank.



my routine exactly, but it sounds like he has the blue chip.


well lou, i'd say don't worry about it if you are intimidated by the flashing process. if you've got the balls, it's a good idea to put a flash program on your extra BIOS bank.

get flashbios off of xbins (512KB image), and use evox, or something like that, to flash it (don't forget to flip to your reserve bank before initiating the flash).





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users