Jump to content


Photo

Xbox 1.3 Tsop Frag


  • Please log in to reply
2 replies to this topic

#1 xxlginger

xxlginger

    X-S Enthusiast

  • Members
  • 3 posts

Posted 04 September 2009 - 01:08 AM

I have a Xbox 1.3 that i flashed the TSOP with iND-BiOS.5003.06.
I changed the HDD to a 160gb one and made sure it all worked. Then i put the mobo and everything back into the box and was about to use AID to install XMBC etc. I plugged the power cord in but when i plugged the av cable in sparks came out and the power went out.. Now when i turn the Xbox on out of the box it reboots twice and then flashes red and green and i get no sound/video but i can eject the dvd drive. I have tired filling 6 holes with solder and making sure its all plugged in right and swapping my old HDD back in. I have a Aladdin super live mod chip but im waiting till the Xbox crystal i bought off ebay for 17 gets here. Just in case its a 1.6 Xbox. I would if possible like to get my 1.3 Xbox working again.
I hope that all makes sense
Thank You
xxlginger


#2 xxlginger

xxlginger

    X-S Enthusiast

  • Members
  • 3 posts

Posted 04 September 2009 - 11:08 AM

Update it looks like the encoder is fried it gets so hot that it can burn me.
Any one know if i can replace the chip? and if so where to buy one cheap?
Thanks
xxlginger

#3 xxlginger

xxlginger

    X-S Enthusiast

  • Members
  • 3 posts

Posted 04 September 2009 - 04:04 PM

Update i can get the Xbox to turn onto green flashing lights sometimes and the encoder is a little warm.
So im now thinking it may not be the encoder




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users