V1.3? Wont Flash
Posted 25 June 2003 - 10:54 PM
I added this entry in raincoat:
Flash = 0xda8c,"ST W49F020T",0x40000
When i try and flash it with raincoat i get this error:
DETECTED: ST W49F020T (256K)
Programming with bios256.bin...Read 262144 bytes from file
ERASE ERROR AT +0x0...read 0x09
Error: Erase failed for block at +0x0, reads as 0x09
Could your chip be write-protected?
Is it because its a v1.3? can you not flash v1.3 xboxes?
Posted 25 June 2003 - 11:08 PM
Edited by cONEction, 25 June 2003 - 11:09 PM.
Posted 26 June 2003 - 12:36 AM
Posted 26 June 2003 - 10:45 AM
When asked to overwrite select YES.
(the 2 file's are : 'raincoat.conf' & 'raincoat')
don't forget to edit 'raincoat.conf' with your chip type
(Flash = 0xda8c,"ST W49F020T",0x40000)
Hope this helps.
Edited by No1XBoxWizard, 26 June 2003 - 04:14 PM.
Posted 27 June 2003 - 01:17 PM
sl0th, did u resolve this problem? I had a go on a 1.2. Same chip, latest raincoat from the linux site - checked soldering with a meter, and I get exactly the same error.
As far as I can tell, its recognising the chip ok BUT its trying to do a block erase when the chip does not support it, which (I thought) is exactly what raincoat 0.5 was supposed to fix.
Posted 27 June 2003 - 01:40 PM
I just got it to work.
I redownloaded raincoat from the linux page, and dumped the whole lot in, not just the two files mentioned above. Maybe this did it, or I botched somthing the first two times round, but it now works
Posted 27 June 2003 - 03:14 PM
Posted 03 July 2003 - 10:48 AM
Posted 03 July 2003 - 10:52 AM
|QUOTE (FIREitUP @ Jul 3 2003, 11:48 AM)|
|can you flash the TSOP via the mechassault/007 method on a 1.3?!?!?!?!?|
Posted 03 July 2003 - 01:50 PM
v1.2s can be flashed
Posted 03 July 2003 - 05:54 PM
|QUOTE (Alkane @ Jul 3 2003, 07:50 AM)|
| v1.3 TSOPs are write protected, you will not be able to flash them unless you replace the entire chip|
v1.2s can be flashed
your on crack, i was the first one to get the 1.3's and i was able to flash the TSOP on it.
but this is old new if you did a search you would know.
Posted 03 July 2003 - 08:38 PM
what bios is compatible with xbox 1.2/1.3's?
Edited by FIREitUP, 03 July 2003 - 08:46 PM.
Posted 03 July 2003 - 08:58 PM
Posted 03 July 2003 - 09:04 PM
Posted 03 July 2003 - 10:16 PM
but to get the file on the xbox you need-
memorycard with it on it (from modded xbox normally)
install a modchip (like matrix, install evox, ftp savegame over)
ounce u got the file on the xbox, use windows and use telnet-
5. open dos prompt type :telnet 192.168.0.64
6. username: root
7. password: xbox
8. type cd ../../media/E/UDATA/4541000d/000000000000/raincoat
9. type ./raincoat -p bios.bin
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users