Jump to content


Photo

Xdsl - Mount Other Partitions - Help Needed


  • Please log in to reply
4 replies to this topic

#1 nearque

nearque

    X-S Enthusiast

  • Members
  • 3 posts

Posted 07 November 2009 - 11:42 AM

hi,

I'm new to linux and I need help for mounting the spare partitions of my xbox.
I've done a FRUGAL install of xdsl.

here is the information from fdisk and mount:

CODE

root@0[/]# fdisk -l

Disk /dev/hda: 81.9 GB, 81964302336 bytes
16 heads, 63 sectors/track, 158816 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes

Disk /dev/hda doesn't contain a valid partition table

root@0[/]# mount
/dev/root on / type ext2 (rw)
/dev/hda50 on /cdrom type fatx (rw,nosuid,nodev,umask=000,uid=1001,gid=50)
/dev/cloop on /KNOPPIX type iso9660 (ro)
/ramdisk on /ramdisk type tmpfs (rw,size=44540k,size=39241k)
/proc/bus/usb on /proc/bus/usb type usbdevfs (rw,devmode=0666)


now the question is: what I have to do to find and mount the other partitions (the F: drive I used to have with Evox/XBMC for example)

I've dir the /dev folder but there is so much stuff in it ...

thanks a lot for your help !!

Edited by nearque, 07 November 2009 - 11:46 AM.


#2 nearque

nearque

    X-S Enthusiast

  • Members
  • 3 posts

Posted 08 November 2009 - 01:36 AM

why is the partition table unreadable ?
Do I have to do a native install for mounting the F: drive ?
or to rewrite a partition table ?

#3 run088

run088

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,003 posts
  • Interests:rebuilding broken xboxes
  • Xbox Version:v1.0
  • 360 version:none

Posted 08 November 2009 - 07:09 AM

Should show right up when you use a file manager and look into the mnt directory. How big is your hdd? If f drive is bigger than 127 gigs then you are not going to be able to read it. There is also a limitation of size on g but I dont know what it is off the top of my head. The reason for this is cluster size. Xbox-Linux will not read 32k or 64k partitions.

#4 worldwhore3

worldwhore3

    X-S Senior Member

  • Members
  • PipPip
  • 260 posts
  • Location:michigan
  • Interests:softmods, xbox linux,
  • Xbox Version:v1.1
  • 360 version:unknown

Posted 08 November 2009 - 08:23 AM

do you know how to use emelfm yet? if you are trying to work thru the command prompt, you will find it much easier to browse your file system via emelfm.

#5 nearque

nearque

    X-S Enthusiast

  • Members
  • 3 posts

Posted 11 November 2009 - 03:37 PM

ok, sorry for this reply lag ...

The problem was just to know which device to mount and i found answer here: http://www.xbox-linu...sk_Partitioning

I just had to mount the hda55 device and it works fine, for drive F simply:
mount /dev/hda55 /mnt/F

The not-so-serious Fdisk 'invalid partition table' problem drove me into wrong direction rolleyes.gif

thanks




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users