Jump to content


Photo

Complete Guide To Installing Xbreboot For Noobs


  • Please log in to reply
307 replies to this topic

#76 FalconLTD

FalconLTD

    X-S Member

  • Members
  • Pip
  • 129 posts
  • Xbox Version:unk
  • 360 version:v3.0 (falcon)

Posted 14 December 2009 - 02:25 AM

wait the filename says 'gentoo live cd xenon beta'. Does this mean that it will only work on xenon 360's ? I have a falcon. Could be this cause of the problems in the previous posts?

Edited by FalconLTD, 14 December 2009 - 02:25 AM.


#77 jmslate23

jmslate23

    X-S Member

  • Members
  • Pip
  • 108 posts
  • Location:Morristown, TN
  • Xbox Version:none
  • 360 version:v4.0 (jasper)

Posted 14 December 2009 - 02:27 AM

Thanks for the tut. I had a problem with nandpro. Couldn't get "FlashConfig:01198010". Kept getting 001200... Just for othes that have this problem, my solution was to soder the diode directly to the xbox motherboard. Tried it on the other end of my cable and I kept getting the wrong numbers.

For anyone interested I have a falcon board with a benq drive. Would not work with the resistors. Cable length is about 12".

Edited by jmslate23, 14 December 2009 - 02:29 AM.


#78 vintage_guitar

vintage_guitar

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,441 posts
  • Xbox Version:v1.4
  • 360 version:unknown

Posted 14 December 2009 - 03:05 AM

QUOTE(FalconLTD @ Dec 13 2009, 07:25 PM) View Post

wait the filename says 'gentoo live cd xenon beta'. Does this mean that it will only work on xenon 360's ? I have a falcon. Could be this cause of the problems in the previous posts?

No. This livecd works on my 512MB jasper.

#79 infidelity

infidelity

    X-S Expert

  • Members
  • PipPipPip
  • 650 posts
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 14 December 2009 - 03:11 AM

Well then can you tell me exactly what you did to get this going? I have no idea why this is not working, I've burned it twice, and i'm getting nowhere.....

EDIT - Well I was able to burn this image to a DVD-R using DVD Decrypter and it worked.

Took at least 6 minutes or so to actualy get going it seems.

But I have a new problem, I'm unable to type anything with the xbox controller. Do I need to have a usb keyboard or something in order to do this? sad.gif cause I don't have one......

Edited by infidelity, 14 December 2009 - 03:45 AM.


#80 FalconLTD

FalconLTD

    X-S Member

  • Members
  • Pip
  • 129 posts
  • Xbox Version:unk
  • 360 version:v3.0 (falcon)

Posted 14 December 2009 - 03:47 AM

infidelity: try burning slower >16x

Still downloading mine, will try tomorrow. Once I fix this problem:

I got xell and the 8955 dash to boot fine. I was using sd resoultion on the xbox and I pics of the keys. They are super hard to read.
The wire on the Db1f1 spot jumped out. No matter how I solder/tape it back, I constantly get the last quadrant ring red. I dont know the error - no display.
Any ideas to fix that?
Edit: I know there is an alternative but cant find the point, if it is below the board then Im leaving it. Any tips on soldering properly to db1f1

Edited by FalconLTD, 14 December 2009 - 03:52 AM.


#81 infidelity

infidelity

    X-S Expert

  • Members
  • PipPipPip
  • 650 posts
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 14 December 2009 - 03:48 AM

what is supposed to be the actual filename for lflash? is it

lflash

or

lflash.c


#82 FalconLTD

FalconLTD

    X-S Member

  • Members
  • Pip
  • 129 posts
  • Xbox Version:unk
  • 360 version:v3.0 (falcon)

Posted 14 December 2009 - 03:52 AM

lflash.c

#83 vintage_guitar

vintage_guitar

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,441 posts
  • Xbox Version:v1.4
  • 360 version:unknown

Posted 14 December 2009 - 05:25 AM

QUOTE(FalconLTD @ Dec 13 2009, 08:47 PM) View Post

Edit: I know there is an alternative but cant find the point, if it is below the board then Im leaving it. Any tips on soldering properly to db1f1

FT1U2, on the backside of the board.

#84 Darth Soap

Darth Soap

    X-S Member

  • Members
  • Pip
  • 113 posts
  • Location:Melbourne, Australia
  • Xbox Version:v1.4
  • 360 version:v3.0 (falcon)

Posted 14 December 2009 - 06:25 AM

I have an Xenon board did the LPT cable all cables are in the right position and did the x3 330 ohm resistors and when i read from nandpro20b i get FlashConfig:000000FC and Error reading all the blocks... Googled and searched the error and came back with nothing..

#85 vintage_guitar

vintage_guitar

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,441 posts
  • Xbox Version:v1.4
  • 360 version:unknown

Posted 14 December 2009 - 06:27 AM

QUOTE(Darth Soap @ Dec 13 2009, 11:25 PM) View Post

I have an Xenon board did the LPT cable all cables are in the right position and did the x3 330 ohm resistors and when i read from nandpro20b i get FlashConfig:000000FC and Error reading all the blocks... Googled and searched the error and came back with nothing..

If your flashconfig is incorrect, your LPT soldering is wrong, or you need a diode on 4

#86 jmslate23

jmslate23

    X-S Member

  • Members
  • Pip
  • 108 posts
  • Location:Morristown, TN
  • Xbox Version:none
  • 360 version:v4.0 (jasper)

Posted 14 December 2009 - 06:36 AM

I have 5 bad blocks found with degraded but it doesn't say block xxxxx found at xxxxx. Any suggestions on how to fix them? Also, I noticed you were using degraded 1.1b. All I can find is 1.1. Would that be the difference? Any help would greatly appreciated. Thanks

#87 FalconLTD

FalconLTD

    X-S Member

  • Members
  • Pip
  • 129 posts
  • Xbox Version:unk
  • 360 version:v3.0 (falcon)

Posted 14 December 2009 - 01:18 PM

try using bad block remapper from redline. It was not tested but I used it successfully. I had 3 bad blocks and it fixed all. When nandpro was writing back to flash, it wrote 1 bad block though. But it booted fine

#88 TAz00

TAz00

    X-S Enthusiast

  • Members
  • 28 posts

Posted 14 December 2009 - 04:09 PM

Hi, I am also getting the annoying error "could not detect a flash controller"

The thing is, i dont own a pc with an LPT port, so i bought a USB -> LPT adapter.
Connected that with Vmware 7 to an Xp virtual machine, the LPT is detected Ok in windows, but i cant get a connection.

I soldered the 100ohm resistors and diodes, on, maybe 30cm, cable.

Any ideas? Anyone tried dumping the nand with a Usb-Lpt adapter?

#89 Roamin64

Roamin64

    X-S Member

  • Members
  • Pip
  • 89 posts

Posted 14 December 2009 - 05:08 PM

QUOTE(TAz00 @ Dec 14 2009, 10:09 AM) View Post

Hi, I am also getting the annoying error "could not detect a flash controller"

The thing is, i dont own a pc with an LPT port, so i bought a USB -> LPT adapter.
Connected that with Vmware 7 to an Xp virtual machine, the LPT is detected Ok in windows, but i cant get a connection.

I soldered the 100ohm resistors and diodes, on, maybe 30cm, cable.

Any ideas? Anyone tried dumping the nand with a Usb-Lpt adapter?



You should try a different pc , with a real LPT port. I has been known that most usb to lpt or pci to lpt won'T work with nandpro20b. Did you at least make sure it was set to a lpt port (378 / 278 or 3BC) i don'T think nandpro20b can look anywhere else. Mostlikely that adapter of yours won'T work.

#90 FalconLTD

FalconLTD

    X-S Member

  • Members
  • Pip
  • 129 posts
  • Xbox Version:unk
  • 360 version:v3.0 (falcon)

Posted 14 December 2009 - 06:24 PM

QUOTE(TAz00 @ Dec 14 2009, 11:09 AM) View Post

Hi, I am also getting the annoying error "could not detect a flash controller"

The thing is, i dont own a pc with an LPT port, so i bought a USB -> LPT adapter.
Connected that with Vmware 7 to an Xp virtual machine, the LPT is detected Ok in windows, but i cant get a connection.

I soldered the 100ohm resistors and diodes, on, maybe 30cm, cable.

Any ideas? Anyone tried dumping the nand with a Usb-Lpt adapter?

you should have bought a usb spi header.

Edited by FalconLTD, 14 December 2009 - 06:25 PM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users