Jump to content


Photo

Having Troubles With Chip Install


  • Please log in to reply
1 reply to this topic

#1 cykage

cykage

    X-S Senior Member

  • Members
  • PipPip
  • 153 posts

Posted 07 December 2009 - 02:38 AM

I'm installing a DuoX2 Cromwell on a 1.6b
I've installed this chip a few times, and have never had a problem really.
But when I try to boot to the chip, the Xbox powers up for ~1 second, and re powers on. And then flashes red and green, and there is no video output. It works fine when bypassing the chip.
I don't really understand, I've checked all the solder connections several times.
I would re-do the entire thing but I don't have any desoldering braid...

Any advice please?

Edit: Nevermind... I went over each solder joint for like the 6th time, and it seems to be working now.
Thread can be deleted ;\

Edited by cykage, 07 December 2009 - 03:00 AM.


#2 Joes2Silly

Joes2Silly

    X-S Senior Member

  • Members
  • PipPip
  • 254 posts
  • Xbox Version:v1.0
  • 360 version:none

Posted 08 December 2009 - 02:54 AM

Did your DuoX2 come with a LPC rebuild kit? It looks like a small piece of thin plastic with few holes and points you need to solder. There should be some info on installing them around here, and if you don't have a LPC rebuild kit you can wire it up yourself wink.gif




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users