Jump to content


Photo

Having Issues With Xell


  • Please log in to reply
3 replies to this topic

#1 Makaveli1337

Makaveli1337

    X-S Enthusiast

  • Members
  • 15 posts

Posted 19 December 2009 - 06:36 AM

So I just finished flashing XBR onto my 512mb nand jasper. It appears to work as my kernel is now 8955, I had 7363 prior to this. However, I have not gotten my CPU key yet, and I understand that in order to get into Xell which is preloaded on XBR you must put your xbox360 wired controller in back USB port and turn it on with guide button. I do this and it turns on but gives me video output. But, when I turn on the console like normal it boots to NXE with no problems.

#2 j3ll3

j3ll3

    X-S Member

  • Members
  • Pip
  • 105 posts
  • Xbox Version:v1.6b
  • 360 version:v5.0 (360S - trinity)

Posted 19 December 2009 - 11:40 AM

xell doesn't support hdmi

#3 SpIdErXeN

SpIdErXeN

    X-S Senior Member

  • Members
  • PipPip
  • 270 posts

Posted 07 January 2010 - 04:18 AM

QUOTE(Makaveli1337 @ Dec 19 2009, 06:36 AM) View Post

So I just finished flashing XBR onto my 512mb nand jasper. It appears to work as my kernel is now 8955, I had 7363 prior to this. However, I have not gotten my CPU key yet, and I understand that in order to get into Xell which is preloaded on XBR you must put your xbox360 wired controller in back USB port and turn it on with guide button. I do this and it turns on but gives me video output. But, when I turn on the console like normal it boots to NXE with no problems.


Mine is doing the same exact thing...anybody have any ideas? I've tried using rca and component cables, don't even have an hdmi cable. sad.gif

Edited by SpIdErXeN, 07 January 2010 - 04:18 AM.


#4 AZImmortal

AZImmortal

    X-S Genius

  • Members
  • PipPipPipPip
  • 842 posts
  • Xbox Version:v1.0
  • 360 version:v4.0 (jasper)

Posted 07 January 2010 - 05:04 AM

If you guys are using the latest revision of XBReboot, you boot into Xell by pressing the eject button. However, it's an older version of Xell that doesn't show your CPU or DVD keys. You can extract the updated Xell from the older version of XBReboot and flashing it onto your current flash by using these commands in Nandpro.

CODE
nandpro oldxbr.bin: -r16 newxell.bin 30 10
nandpro lpt: -w16 newxell.bin 30


After doing this, you can boot Xell by using the wired controller or remote control command.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users