Jump to content


Photo

Tsop Without Modchip ?


  • Please log in to reply
13 replies to this topic

#1 Frofro

Frofro

    X-S Enthusiast

  • Members
  • 12 posts

Posted 25 January 2010 - 11:54 AM

Hello people,

I just get a new xbox and use hot swap to install a dashboard. Then i buy a new hardrive and try to lock it but ... the harddrive is not able to be locked, and that sux. So i take a look about removing the lock protection and get some doc about TSOP flashing.
Now i have the wire connected, the harddrive with dashboard, but im not able to find any documentation about flashing my bios without a mod chip.

Is there any solution ? (without buying a new HDD)

Thanks in advance,

#2 steveo1978

steveo1978

    Local Retard

  • Head Moderators
  • PipPipPipPipPip
  • 1,967 posts
  • Gender:Male
  • Location:north carolina
  • Xbox Version:v1.1
  • 360 version:v5.0 (360S - trinity)

Posted 25 January 2010 - 12:55 PM

http://forums.xbox-s...howtopic=165336

read through those links and if you get confused just ask

you do not need a chip to flash the tsop at all in fact its almost impossible to flash a tsop with a modchip installed

#3 Frofro

Frofro

    X-S Enthusiast

  • Members
  • 12 posts

Posted 25 January 2010 - 01:57 PM

In fact, i thought there is some software to launch with my dashboard, so i will be able to flash the bios "like" on a computer.
Actually, i understand that there is two way :
- with evox which have a software to change the bios, but need to boot on the evox CD (and it seems its difficult to find it, all link i find are broken).
- with 007 and other. But the tut dont say if its possible to copy the 007 on my HDD, then launch it.

#4 steveo1978

steveo1978

    Local Retard

  • Head Moderators
  • PipPipPipPipPip
  • 1,967 posts
  • Gender:Male
  • Location:north carolina
  • Xbox Version:v1.1
  • 360 version:v5.0 (360S - trinity)

Posted 25 January 2010 - 02:31 PM

the evox dash will flash some of the tsops and then there's a Eurasia disk that will flash the tsops to. Find out what tsop you have and what version motherboard you have and I will let you know what you will need

Edited by steveo1978, 25 January 2010 - 02:32 PM.


#5 Frofro

Frofro

    X-S Enthusiast

  • Members
  • 12 posts

Posted 25 January 2010 - 02:58 PM

i have a 1.2 (bios 5101) (with bios checker)
But evox (which i finally find) find me a bios version as unknown and a kernel version 1.00.5838.01.

BTW, the wire correspond to a 1.2>1.5 xbox

Edited by Frofro, 25 January 2010 - 03:40 PM.


#6 lordvader129

lordvader129

    He Who Posts Alot...

  • Head Moderators
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 17,752 posts
  • Gender:Male
  • Location:Chicago, USA
  • Xbox Version:v1.1
  • 360 version:v5.0 (360S - trinity)

Posted 25 January 2010 - 07:39 PM

QUOTE(Frofro @ Jan 25 2010, 07:58 AM) View Post

i have a 1.2 (bios 5101) (with bios checker)
But evox (which i finally find) find me a bios version as unknown and a kernel version 1.00.5838.01.

BTW, the wire correspond to a 1.2>1.5 xbox

chances are you have a winbond TSOP so youll want to go with eurasia

#7 Frofro

Frofro

    X-S Enthusiast

  • Members
  • 12 posts

Posted 25 January 2010 - 08:32 PM

So i took the "eurasia pro generic flash disk". Now need to find a good bios, if you have one. I only need to remove the lock check.


#8 1hotjob

1hotjob

    X-S Knowledgebase

  • Head Moderators
  • PipPipPipPipPipPipPipPip
  • 4,761 posts
  • Gender:Male
  • Xbox Version:unk
  • 360 version:unknown

Posted 25 January 2010 - 11:48 PM

I think you will need the original soft modded HD in the Xbox to TSOP flash. Then you can use Slayer's to prep the new drive you have.

#9 Frofro

Frofro

    X-S Enthusiast

  • Members
  • 12 posts

Posted 28 January 2010 - 08:54 PM

i try eurasia & evox bios flah and each say that the bios is locked.
I verify one point, but the second i dont have real point to test it.

So, is there another soft to try to flash it ? Or its my TSOP point which are bad ?

#10 steveo1978

steveo1978

    Local Retard

  • Head Moderators
  • PipPipPipPipPip
  • 1,967 posts
  • Gender:Male
  • Location:north carolina
  • Xbox Version:v1.1
  • 360 version:v5.0 (360S - trinity)

Posted 28 January 2010 - 09:26 PM

did you solder both the points for your version motherboard? If you need to check and see if your points are soldered good enough you can look in Lordvaders signature and click on the one that says alternate points and use them to check and see if it is soldered correct

#11 Frofro

Frofro

    X-S Enthusiast

  • Members
  • 12 posts

Posted 29 January 2010 - 07:00 PM

lordvarders have better checkpoint, so its ok now.
Only the bad stuff, i took the Evox M8+ bios and fan speed is set to 100%, thats not fun, if someone have a trick to change it, or to have automatic fan speed depending on heat.

Thank for all people

#12 lordvader129

lordvader129

    He Who Posts Alot...

  • Head Moderators
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 17,752 posts
  • Gender:Male
  • Location:Chicago, USA
  • Xbox Version:v1.1
  • 360 version:v5.0 (360S - trinity)

Posted 29 January 2010 - 10:22 PM

QUOTE(Frofro @ Jan 29 2010, 12:00 PM) View Post

lordvarders have better checkpoint, so its ok now.
Only the bad stuff, i took the Evox M8+ bios and fan speed is set to 100%, thats not fun, if someone have a trick to change it, or to have automatic fan speed depending on heat.

Thank for all people

XBMC can auto adjust fan speed for temperature, but only in XBMC (IE if you run a game or launch another other app the fan goes back to 100)

#13 Frofro

Frofro

    X-S Enthusiast

  • Members
  • 12 posts

Posted 29 January 2010 - 10:34 PM

on my last xbox, i didnt get that problem, but i dont remember which bios it was.
maybe xcuter

#14 lordvader129

lordvader129

    He Who Posts Alot...

  • Head Moderators
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 17,752 posts
  • Gender:Male
  • Location:Chicago, USA
  • Xbox Version:v1.1
  • 360 version:v5.0 (360S - trinity)

Posted 29 January 2010 - 11:55 PM

you can use evtool to adjust the fan speed and reflash




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users