Jump to content


Photo

NandPro 2.0c *Update: 2.0d*


  • Please log in to reply
23 replies to this topic

#1 Xbox-Scene

Xbox-Scene

    Memba Numero Uno

  • Admin
  • 5,201 posts
  • Location:Yurop
  • Xbox Version:unk
  • 360 version:unknown

Posted 09 February 2010 - 03:37 AM

NandPro 2.0c *Update: 2.0d*
Posted by XanTium | February 8 21:37 EST | News Category: Xbox360
 
A new version of NandPro(info) has been released, the original cmd-line tool that allows you to read/flash the Xbox360 NAND via LTP or USB:
What's new/fixed:
* Bit settling verify feature added for LPT reading
* Add support for Jasper16a
* Improved detection for virtual nand device, fixes some problems with writing to vnand.
* Always corrects the ECC bytes (but not SPARE), even in raw mode
ie: A raw file that has been hex edited can simply be flashed with -w
* Added command line swithces
%r will read SPARE data only, 16 bytes per block
@w will write RAW file, while correcting block numbers
Can "force" a flash config on command line by appending :HexFlashConfig

*update* 2.0d has been released.
What's new/fixed:
* For compatibility purposes -w does not calculate ECC
* Raw files are flashed pure using -w. To correct ECC errors use *w instead
ie: A raw file that has been hex edited can simply be flashed with *w


Official Site: By Tiros at free60.org (thx to WarriorSan for the news)
Download: here






#2 BulletMag

BulletMag

    X-S Young Member

  • Members
  • Pip
  • 37 posts

Posted 09 February 2010 - 03:50 AM

Cheers, just need X64 support now and i can get rid of my 32bit vista all together smile.gif

#3 Redline99

Redline99

    X-S Senior Member

  • Members
  • PipPip
  • 228 posts

Posted 09 February 2010 - 04:50 AM

NandPro20c has been removed pending a small correction to be released soon.

(Dont use download link on main page until XanTium has had a chance to update.)


#4 Haruno

Haruno

    X-S Expert

  • Members
  • PipPipPip
  • 523 posts
  • Xbox Version:v1.0
  • 360 version:v4.0 (jasper)

Posted 09 February 2010 - 06:31 AM

QUOTE(BulletMag @ Feb 8 2010, 06:50 PM) View Post

Cheers, just need X64 support now and i can get rid of my 32bit vista all together smile.gif


http://nds.cmamod.co...ver_w32_x64.zip
and
http://forums.xbox-s...howtopic=698049

#5 keropi

keropi

    X-S Young Member

  • Members
  • Pip
  • 32 posts
  • Location:Ioannina / Greece
  • Xbox Version:v1.4
  • 360 version:v4.0 (jasper)

Posted 09 February 2010 - 08:05 AM

* Add support for Jasper16a

I wonder what the improvements are, because I already xbr'ed my 2 16a jaspers and are fine smile.gif

#6 niai

niai

    X-S Expert

  • Members
  • PipPipPip
  • 548 posts
  • Location:Ireland
  • Xbox Version:v1.4
  • 360 version:v4.0 (jasper)

Posted 09 February 2010 - 12:09 PM

same i have done 3 jasper16a all worked grate

#7 blipidy

blipidy

    X-S Member

  • Members
  • Pip
  • 75 posts
  • Xbox Version:none
  • 360 version:v3.0 (falcon)

Posted 09 February 2010 - 04:11 PM

wish i saw this yesterday because i would have grabbed the 2.0b version, didn't see this until just now tho. but i ended up using the 2.0c version to dump my nand and uncripple the hdd on my falcon using win xp sp3. two identical dumps w/ no bad blocks. worked fine.

will hold off on using it to flash xbr to my jasper16 tho until new release just as a precaution

Edited by blipidy, 09 February 2010 - 04:12 PM.


#8 antibot

antibot

    X-S Enthusiast

  • Members
  • 11 posts

Posted 09 February 2010 - 05:45 PM

Hi team,
can u please tell me, what is a jasper16a (a new release of motherbord?)
With this nand can i set a xbreboot on my console (if i already have a dash 7xxx)?



#9 fbane

fbane

    X-S Enthusiast

  • Members
  • 25 posts

Posted 09 February 2010 - 10:18 PM

Version 2.0d has been released.

#10 sam3k

sam3k

    X-S Enthusiast

  • Members
  • 16 posts

Posted 09 February 2010 - 10:35 PM

any one have link to the new one?

edit:

NM here is a link

http://rapidshare.co.../NandPro20d.rar

Edited by sam3k, 09 February 2010 - 10:49 PM.


#11 ddxcb

ddxcb

    X-S X-perience

  • Members
  • PipPip
  • 403 posts

Posted 10 February 2010 - 12:32 AM

and for the people who dont like rapids**t enjoy

NandPro20D.rar

Edit: Still using 20.b, the new one is confusing LOL.

Edited by ddxcb, 10 February 2010 - 12:45 AM.


#12 niai

niai

    X-S Expert

  • Members
  • PipPipPip
  • 548 posts
  • Location:Ireland
  • Xbox Version:v1.4
  • 360 version:v4.0 (jasper)

Posted 10 February 2010 - 01:40 AM

why is it confusing just use it the same as nandpro2.0b dont you?

#13 GOTitCUZiMODDED

GOTitCUZiMODDED

    X-S Member

  • Members
  • Pip
  • 88 posts
  • Location:In the nutsack of TX!
  • Xbox Version:v1.4
  • 360 version:v4.0 (jasper)

Posted 10 February 2010 - 02:04 AM

Just used it on 4x Jaser16a's and all good! Thanks for the update and fix! Much appreciated! I'm gonna bank with these consoles so is there a donation link anywhere? biggrin.gif

#14 magnus__hydra

magnus__hydra

    X-S Member

  • Members
  • Pip
  • 88 posts
  • Xbox Version:v1.6
  • 360 version:v4.0 (jasper)

Posted 10 February 2010 - 08:02 AM

I tried using nandpro D to flash the rawkv.binto xbr and it get a "could not open Virtual Nand Device File.XBR512.bin"

I use nandpro B and it works just fine... it there a different command when using the XBR? Read the rawkv.bin form the nand works fine with version D but not writing to xbr.

explame of what I mean.
nandpro newjasper64.bin: -r64 rawkv.bin 1 1
nandpro newjasper64.bin: -r64 rawconfig.bin EF7 2

works with verison B and D
But
nandpro XBR512.bin: -w64 rawkv.bin 1 1
nandpro XBR512.bin: -w64 rawconfig.bin EF7 2
give me "could not open Virtual Nand Device File.XBR512.bin" Using version D

Using version B it works fine...


#15 antibot

antibot

    X-S Enthusiast

  • Members
  • 11 posts

Posted 10 February 2010 - 09:47 AM

Guys,
Please tell me. It is very important

QUOTE
Hi team,
can u please tell me, what is a jasper16a (a new release of motherbord?)
With this nand can i set a xbreboot on my console (if i already have a dash 7xxx)?





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users