Xbox Component Setup
Posted 11 February 2010 - 06:59 AM
regarding the following diagram:
located in this thread:
I have successfully hooked up the 5RCA cable component setup by just using the RGB and RW audio ports setup as females on the wall of my xbox 1.
Anyways, I soldered the wires onto the bottom of the board (as I CBF'd removing the port ontop)
I'm having some space issues which I'm working to alleviate by reducing the thickness of the wire for each of the signal feeds. I'm curious, am I also able to have the RGB cables shares a common earth and the RW audio cables share a seperate signal earth?
This could potentially clear up heaps of room by reducing the wire count going under the board in half!
any help would be appreciated.
Posted 12 February 2010 - 01:12 AM
I originally started from that thread but i couldn't find the answer. (unless your thread is pointing to a specific post?)
Posted 14 February 2010 - 11:39 PM
so looks like audio can be bridged which is the reduction of 1 wire :-)
Now to see if the video signals follow the same lead.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users