Jump to content


Photo

Benq Flash Options


  • Please log in to reply
4 replies to this topic

#1 Killtakular

Killtakular

    X-S Enthusiast

  • Members
  • 8 posts

Posted 30 March 2010 - 04:59 AM

What exactly are my options here?

From what i read, i have 2 choices.

Cut the 2 leads, solder a switch, and i would be able to flash with my Ich7

or

get ahold of a VIA chipset sata card, unsure of the exact one, and i should be able to flash it without cutting the traces


are my assumptions here true, or am i being mislead?

I realize i posted this in the general forum also, but when i posted there, i thought i was here, and am unsure of how to delete a post.

#2 vb_encryption_vb

vb_encryption_vb

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,943 posts
  • Location:Acworth,GA
  • Xbox Version:v1.6
  • 360 version:v4.0 (jasper)

Posted 30 March 2010 - 11:17 AM

Have a problem here....your title says Benq Flash, but your talking about flashing a liteon from what I've just read...Unless your reading some really old tutorials on Benqs but I don't recall any trace cutting..Benq and Liteon DVD ROM trays look identical btw.

#3 KILLorBE

KILLorBE

    X-S Senior Member

  • Members
  • PipPip
  • 194 posts
  • Location:Them Netherlands, Nijmegen
  • Xbox Version:none
  • 360 version:v1 (xenon)

Posted 30 March 2010 - 11:31 AM

QUOTE(vb_encryption_vb @ Mar 30 2010, 11:17 AM) View Post
Unless your reading some really old tutorials on Benqs but I don't recall any trace cutting..Benq and Liteon DVD ROM trays look identical btw.

This is a guide in which they cut traces: http://caster420.360...038/vad6038.pdf
August 2007 tongue.gif

Just Google JungleFlasher and you should find most info needed in the tutorial.


#4 Killtakular

Killtakular

    X-S Enthusiast

  • Members
  • 8 posts

Posted 30 March 2010 - 06:14 PM

Thanks for the reply, ive read through the jungle flasher manual, and, am unsure at this moment if the ICH7 chipset is supported or if i would need the VIA chipset.

#5 vb_encryption_vb

vb_encryption_vb

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,943 posts
  • Location:Acworth,GA
  • Xbox Version:v1.6
  • 360 version:v4.0 (jasper)

Posted 30 March 2010 - 07:22 PM

QUOTE(Killtakular @ Mar 30 2010, 01:14 PM) View Post

Thanks for the reply, ive read through the jungle flasher manual, and, am unsure at this moment if the ICH7 chipset is supported or if i would need the VIA chipset.



It's Intel, it should be fine, hook up the drive start up jungleflasher and see if it's detected.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users