Jump to content


Photo

So I Don't Need To Make An Lpt Port Connector?


  • Please log in to reply
2 replies to this topic

#1 Coded62

Coded62

    X-S Enthusiast

  • Members
  • 12 posts
  • Xbox Version:none
  • 360 version:v4.0 (jasper)

Posted 02 July 2010 - 12:39 AM

Hi, I was reading "Solder only the wires leading to the LPT port connector for now, unless your 100% sure your XBOX is exploitable." at http://docs.google.c...mv5h_30dw33vpf4 and I was wondering with a xenon board with a dash of 7357, I could skip? the entire dump (assuming I could get it from the Cfw later) and continue on with the installation of xell/xellous and an os? Thanks

#2 sonic2120

sonic2120

    X-S Senior Member

  • Members
  • PipPip
  • 299 posts
  • Location:Alabama
  • Xbox Version:v1.6b
  • 360 version:v4.0 (jasper)

Posted 02 July 2010 - 12:54 AM

You're going to need some way for the xbox to communicate with the 360. Also you need the NAND to inject xell/xellous into. The quote from the guide means don't go through the trouble of doing the jtag wires if you're unsure whether or not the system is exploitable.

Its understandable you want to get it up and running faster but some corners just can't be cut.

#3 Coded62

Coded62

    X-S Enthusiast

  • Members
  • 12 posts
  • Xbox Version:none
  • 360 version:v4.0 (jasper)

Posted 02 July 2010 - 12:56 AM

Ahh ok I understand after re-reading it as in only connect the LPT wires not the jtag ones. Thanks.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users