Psu Dead Because Of Main Switch?
Posted 02 July 2010 - 07:40 PM
so got this ylod ps3 wich i dissambled today to reflow the gpu.
everything went fine.
when the mobo cooled down i attached the psu to look if it ylods again.
and it didnt.
then i hit the main power switch to prevent the ps3 from booting because no heatsinks where attached.
since then the ps3 is dead.
no red standby light.......just dead.
i checked the 5 pinouts from the psu with a multimeter
pins 1, 2 and 3 are dead and pins 4 and 5 have 5v.
i found these pinout voltages in the forum:
1 = 12V power on/off(don't mess with!)
2 = 5V return
3 = 5V return
4 = +5V
5 = +5V
i guess because there are no 12v the psu is broken?
is there a fuse or something i can fix or do i need to get a new psu if it is indeed the psu...?
are there any other things that could have happened?
thanks and bye
Posted 03 July 2010 - 12:33 AM
Posted 03 July 2010 - 08:09 AM
i checked the fuse a couple of minutes ago....sadly its fine, 0.6 ohms
how do i check if the psu gives 12v or not?
Posted 03 July 2010 - 07:42 PM
is there something around in the net?
Edited by idefix23, 03 July 2010 - 07:43 PM.
Posted 06 July 2010 - 10:04 PM
ps3 is working again!
it wasnt a broken psu.
it was the small flat cable wich connects the mainboard to the power and eject board wich was broken.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users